Troubleshooting method for common faults of CK6163D CNC lathe

Here are some of the faults that are often encountered in repairing CK6163D CNC lathes for maintenance personnel to learn from. 1. Different signal lines touch each other (1) In MDI mode, use the keyboard to enter the tool change and shift command. After pressing the cycle start button, the tool change and shift can not be executed, and there is no alarm display on the CRT. After checking the diagnostic port, although the feed hold button is not pressed, a "1" signal is always given in the interface. The reason is not that the feed hold button is normally open and the normally closed contact is connected incorrectly, but a control line of the button is not fixed, and it falls into contact with the +24V of other buttons, and the system is always in a stop state, so the other The functions are not executed properly. (2) Quick jog, the knife holder does not go. Hand shake generator

Track Light

We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting

Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.

While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.

Track Light Fixture,Led Track Light Bulbs,Track Light Fixtures,E27 Track Light

Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlight.com