1. There are many processes for forming metal materials into desired products, such as casting, forging, extrusion, rolling, drawing, stamping, cutting, powder metallurgy, and the like. Among them, casting is the most basic and most commonly used process.
2. The molten metal liquid is injected into a hollow mold made of a high temperature resistant material, and after condensation, a product of a desired shape is obtained, which is casting. The resulting product is a casting.
3. Casting can be divided into ferrous metal casting (including cast iron, cast steel) and non-ferrous metal casting (including aluminum alloy, copper alloy, zinc alloy, magnesium alloy, etc.) according to the material of the casting. Precision Casting Factory specializes in non-ferrous metal casting, with emphasis on aluminum and zinc alloy casting.
4. Casting can be divided into sand casting and metal casting according to the material of the casting. The Precision Casting Factory is comfortable with both casting processes and designs and manufactures these two types of casting molds.
5. Casting can also be divided into gravity casting and pressure casting according to the casting process of molten metal. Gravity casting refers to the process of injecting molten metal into a mold under the action of gravity of the earth, also called casting. Generalized gravity casting includes sand casting, metal casting, investment casting, lost foam casting, mud casting, etc.; narrow gravity casting refers to metal casting. Pressure casting refers to the process in which molten metal is injected into a mold under the action of other external forces (excluding gravity). Generalized pressure casting includes pressure casting and vacuum casting of die casting machines, low pressure casting, centrifugal casting, etc.; narrow pressure casting refers to metal type pressure casting of die casting machine, referred to as die casting. Precision castings have long been engaged in gravity casting of sand and metal. These casting processes are currently the most commonly used and least expensive in the casting of non-ferrous metals.
6. Sand casting is a traditional casting process that uses sand as the main molding material to make a mold. The sand type is generally cast by gravity, and the process of low pressure casting, centrifugal casting, etc. can also be used when there are special requirements. Sand casting has a wide adaptability. Small pieces, large pieces, simple pieces, complicated parts, single pieces and large quantities can be used. The mold for sand casting was previously made of wood and is commonly known as wood mold. In order to change the wood molds to be easily deformed and easily damaged, Xudong Precision Casting Factory has changed to aluminum alloy molds or resin molds with high dimensional accuracy and long service life, except for sand castings produced in one piece. Although the price has increased, it is still much cheaper than the mold for metal casting, and the price advantage is particularly prominent in small batches and large parts. In addition, the sand type has a higher degree of refractoriness than the metal type, and thus a material having a higher melting point such as a copper alloy or a ferrous metal is also used in this process. However, sand casting also has some shortcomings: because each sand casting can only be poured once, the casting is damaged after obtaining the casting, and must be reshaped, so the production efficiency of sand casting is low; and because the overall nature of sand is soft Porous, so sand casting castings have lower dimensional accuracy and rougher surfaces. However, the accumulation of technology in the precision casting factory has greatly improved the surface condition of sand castings, and the effect after shot blasting is comparable to that of metal castings.
7. Metal casting is a modern process for producing hollow molds for casting from heat-resistant alloy steel. The metal type can be either gravity casting or pressure casting. The metal mold can be used repeatedly and repeatedly. Once the molten metal is poured once, the casting is obtained once, and the life is long and the production efficiency is high. The metal type casting not only has good dimensional accuracy, but also has a smooth surface, and the casting strength is higher than that of the sand type when casting the same molten metal, and it is less likely to be damaged. Therefore, in the case of mass production of medium and small castings of non-ferrous metals, as long as the melting point of the casting material is not too high, metal casting is generally preferred. However, metal casting also has some shortcomings: because the heat-resistant alloy steel and the hollow cavity on which it is processed are relatively expensive, the metal mold is expensive, but the overall cost is cheaper than that of the die-casting mold. too much. For small batch production, the cost of the mold allocated to each product is obviously too high, which is generally not easy to accept. Moreover, because the metal mold is limited by the size of the mold material, the ability of the cavity processing equipment, and the casting equipment, it is also ineffective for particularly large castings. Therefore, metal casting is rarely used in small batch and large parts production. In addition, although the metal mold uses heat-resistant alloy steel, its heat resistance is still limited. It is generally used for the casting of aluminum alloy, zinc alloy and magnesium alloy. It has been used less in copper alloy casting and used for ferrous metal casting. It's even less. The metal molds of Xudong Precision Casting Factory are all designed and manufactured by ourselves, so that they can provide customers with cheap and suitable high-quality molds in a timely manner.
8. Die-casting is a metal-type pressure casting on a die-casting machine, which is currently the most productive casting process. Die casting machines are divided into two types: hot chamber die casting machine and cold chamber die casting machine. The hot chamber die casting machine has high degree of automation, less material loss, and higher production efficiency than the cold chamber die casting machine. However, due to the heat resistance of the machine parts, it can only be used for the production of castings of low melting point materials such as zinc alloy and magnesium alloy. . Aluminum alloy die castings, which are widely used today, can only be produced on cold chamber die casting machines due to their high melting point. The main feature of die casting is that the molten metal fills the cavity under high pressure and high speed, and is formed and solidified under high pressure. The insufficiency of the die casting is: because the molten metal is in the process of filling the cavity under high pressure and high speed, it is inevitable The air in the cavity is wrapped inside the casting to form the subcutaneous pores, so the aluminum alloy die-casting parts are not suitable for heat treatment, and the zinc alloy die-casting parts are not suitable for surface spraying (but can be painted). Otherwise, the internal pores of the casting will expand with heat upon heating as described above, causing the casting to deform or bubble. In addition, the mechanical cutting allowance of die-casting parts should also be smaller, generally about 0.5mm, which can reduce the weight of castings, reduce the amount of cutting processing to reduce the cost, and avoid the penetration of the dense layer on the surface, revealing the subcutaneous pores, resulting in The workpiece is scrapped.
2. The molten metal liquid is injected into a hollow mold made of a high temperature resistant material, and after condensation, a product of a desired shape is obtained, which is casting. The resulting product is a casting.
3. Casting can be divided into ferrous metal casting (including cast iron, cast steel) and non-ferrous metal casting (including aluminum alloy, copper alloy, zinc alloy, magnesium alloy, etc.) according to the material of the casting. Precision Casting Factory specializes in non-ferrous metal casting, with emphasis on aluminum and zinc alloy casting.
4. Casting can be divided into sand casting and metal casting according to the material of the casting. The Precision Casting Factory is comfortable with both casting processes and designs and manufactures these two types of casting molds.
5. Casting can also be divided into gravity casting and pressure casting according to the casting process of molten metal. Gravity casting refers to the process of injecting molten metal into a mold under the action of gravity of the earth, also called casting. Generalized gravity casting includes sand casting, metal casting, investment casting, lost foam casting, mud casting, etc.; narrow gravity casting refers to metal casting. Pressure casting refers to the process in which molten metal is injected into a mold under the action of other external forces (excluding gravity). Generalized pressure casting includes pressure casting and vacuum casting of die casting machines, low pressure casting, centrifugal casting, etc.; narrow pressure casting refers to metal type pressure casting of die casting machine, referred to as die casting. Precision castings have long been engaged in gravity casting of sand and metal. These casting processes are currently the most commonly used and least expensive in the casting of non-ferrous metals.
6. Sand casting is a traditional casting process that uses sand as the main molding material to make a mold. The sand type is generally cast by gravity, and the process of low pressure casting, centrifugal casting, etc. can also be used when there are special requirements. Sand casting has a wide adaptability. Small pieces, large pieces, simple pieces, complicated parts, single pieces and large quantities can be used. The mold for sand casting was previously made of wood and is commonly known as wood mold. In order to change the wood molds to be easily deformed and easily damaged, Xudong Precision Casting Factory has changed to aluminum alloy molds or resin molds with high dimensional accuracy and long service life, except for sand castings produced in one piece. Although the price has increased, it is still much cheaper than the mold for metal casting, and the price advantage is particularly prominent in small batches and large parts. In addition, the sand type has a higher degree of refractoriness than the metal type, and thus a material having a higher melting point such as a copper alloy or a ferrous metal is also used in this process. However, sand casting also has some shortcomings: because each sand casting can only be poured once, the casting is damaged after obtaining the casting, and must be reshaped, so the production efficiency of sand casting is low; and because the overall nature of sand is soft Porous, so sand casting castings have lower dimensional accuracy and rougher surfaces. However, the accumulation of technology in the precision casting factory has greatly improved the surface condition of sand castings, and the effect after shot blasting is comparable to that of metal castings.
7. Metal casting is a modern process for producing hollow molds for casting from heat-resistant alloy steel. The metal type can be either gravity casting or pressure casting. The metal mold can be used repeatedly and repeatedly. Once the molten metal is poured once, the casting is obtained once, and the life is long and the production efficiency is high. The metal type casting not only has good dimensional accuracy, but also has a smooth surface, and the casting strength is higher than that of the sand type when casting the same molten metal, and it is less likely to be damaged. Therefore, in the case of mass production of medium and small castings of non-ferrous metals, as long as the melting point of the casting material is not too high, metal casting is generally preferred. However, metal casting also has some shortcomings: because the heat-resistant alloy steel and the hollow cavity on which it is processed are relatively expensive, the metal mold is expensive, but the overall cost is cheaper than that of the die-casting mold. too much. For small batch production, the cost of the mold allocated to each product is obviously too high, which is generally not easy to accept. Moreover, because the metal mold is limited by the size of the mold material, the ability of the cavity processing equipment, and the casting equipment, it is also ineffective for particularly large castings. Therefore, metal casting is rarely used in small batch and large parts production. In addition, although the metal mold uses heat-resistant alloy steel, its heat resistance is still limited. It is generally used for the casting of aluminum alloy, zinc alloy and magnesium alloy. It has been used less in copper alloy casting and used for ferrous metal casting. It's even less. The metal molds of Xudong Precision Casting Factory are all designed and manufactured by ourselves, so that they can provide customers with cheap and suitable high-quality molds in a timely manner.
8. Die-casting is a metal-type pressure casting on a die-casting machine, which is currently the most productive casting process. Die casting machines are divided into two types: hot chamber die casting machine and cold chamber die casting machine. The hot chamber die casting machine has high degree of automation, less material loss, and higher production efficiency than the cold chamber die casting machine. However, due to the heat resistance of the machine parts, it can only be used for the production of castings of low melting point materials such as zinc alloy and magnesium alloy. . Aluminum alloy die castings, which are widely used today, can only be produced on cold chamber die casting machines due to their high melting point. The main feature of die casting is that the molten metal fills the cavity under high pressure and high speed, and is formed and solidified under high pressure. The insufficiency of the die casting is: because the molten metal is in the process of filling the cavity under high pressure and high speed, it is inevitable The air in the cavity is wrapped inside the casting to form the subcutaneous pores, so the aluminum alloy die-casting parts are not suitable for heat treatment, and the zinc alloy die-casting parts are not suitable for surface spraying (but can be painted). Otherwise, the internal pores of the casting will expand with heat upon heating as described above, causing the casting to deform or bubble. In addition, the mechanical cutting allowance of die-casting parts should also be smaller, generally about 0.5mm, which can reduce the weight of castings, reduce the amount of cutting processing to reduce the cost, and avoid the penetration of the dense layer on the surface, revealing the subcutaneous pores, resulting in The workpiece is scrapped.
LED Filament COB technology provides amazing illumination. The LED filament bulb tough polystyrene construction provides super bright and shatterproof.Liven up your light display for the holidays with these luxury bulbs! Install these Bulbs into screw base fixtures directly. Unlike fluorescent bulbs, these bulbs are free of UV and mercury.
Headlight Bulb Replacement ,Led Replacement Bulbs,Led Fluorescent Tube,Led Corn Bulb
DONGGUAN JIANXING LIGHTING ELECTRIC APPLIANCES CO., LTD , https://www.szrslightstring.com