Hastelloy C-276 Alloy Steel Plate and Sheet UNS N10276 EN 2.4819
Hastelloy C-276 is a widely used nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments, including those with ferric and cupric chlorides, hot contaminated organic and inorganic media, chlorine, formic and acetic acids,  seawater, brine and hypochlorite and chlorine dioxide solutions. Especially resistant to pitting, crevice corrosion and stress corrosion cracking in reducing environments, and resistant to oxidizing media. Resistant to the formation of grain boundary precipitates in the weld heat affected zone, suitable for most chemical process application in an as-welded condition.
Specifications:
Plate thickness:Â 0.2mm~100mm
Standard plate size:Â 1000*2000mm, 1219*2440mm, 1500*6000mm, 1800*6000mm, 2000*6000mm
Coil Thickness:Â 0.3mm~60mmÂ
Coil width:Â 1m, 1.22m, 1.5m, 1.8m, 2m,2.6m
Length:2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm,as customer's requirements
Any specification as per customer require
Physical properties:
Excellent corrosion resistance in reducing environments.
Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides.
Good corrosion resistance in reducing environments.
Low carbon content minimizes grain boundary carbide precipitation during welding to maintain resistance to corrosion in heat affected zones of welded joints.
Resistance to localized corrosion such as pitting and stress corrosion cracking.
Withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide.
Applications:
Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings.
Flue gas desulfurization systems.
Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping.
Sour gas wells.
Pulp and paper production.
Waste treatment.
Pharmaceutical and food processing equipment.
Â
Surface Finish Introduction :Â
 Charecteristics and Application | |
2B |
The surface brightness and flatness of 2B is better than 2D then theough a special surface treatment to improve its mechanical properties,2B could nearly Satisfy comprehensive uses |
No.3 |
Polished with Abrasive Belt of git#100#200#,have better brightness with discontinuous coarse stria used as inner and external omaments for building, electrical appliances and kitchen utensils etc. |
No.4 |
Polished with Abrasive belt of grit#150#180,have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtub buildings inner and extemal omaments electrical appliances kitchen utensils and food processing |
BA |
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and food reflexivity like mirrorm kitchen apparatus, omament etc. |
8K |
The product have excellent brightness and prefer reflexivity can be the mirror. |
HL |
Polished with abrasive belt of trit#150#320 on the NO.4 finish and has continuous streaks, mainly used as buildings omaments elevators, door of building, frontal plate etc. |
Packing:
Using metal belt pack the seamless steel pipes, then put them in the containers . If the guests need the wooden pallets, we will put the seamless steel pipes on the wooden pallets first, then put them in the containers or as your requirements.
Â
Hastelloy alloy plate
| Item | Hastelloy Alloy Cold Rolling Sheet/Plate C-276 |
| Width | 1000mm-2600mm |
| Thickness | 0.3mm-100mm |
| Length | As your requirements |
| Materials | B-2,B-3,C-276,C-4,C-22,C-2000,G-3,G-30,N10665,N10276,N06022, N06455 |
| Minimum order | 1 ton |
| Standards | ASTM A511 A269 A312 A213, GB/ T14976-2002 GB 13296-91 |
| FOB Price | the latest Price |
| Surface | polish, primary colour,matt,mirror face ,wire drawing |
| Procuctions requirement | cold drawing, cold rolling, precision rolling |
| Main markets | Asia,Europe,Middle-east area,Africa,South/North America |
| Certifications | ISO,SGS |
| Applications | chemical industry, metallurgy, construction, water conservancy |
Our Advantages:
1.More than 200 patterns
2.Bottom price
3.Reliable quality and service
4.Fast delivery
We will reply you in 24 hours. Please remember check your inbox.
Welcome to inquiry. Looking forward to cooperate with you in the near future.
Photo Show
Material and Compositions:Â
| Type | Grade | Product Name | compositions | GB | |||||||
| Corrosion resistant |
General Austenitic stainless steel |
EN | ASTM/UNS | C | N | Cr | Ni | Mo | Others | ||
| 1.4301 | 304 | 4301 | 0.04 | - | 18.1 | 8.3 | - | - | 0Cr18Ni9 | ||
| 1.4306 | 304L | 4306 | 0.02 | - | 18.2 | 10.1 | - | - | 00Cr19Ni10 | ||
| 1.4307 | 304L | 4307 | 0.02 | - | 18.1 | 8.3 | - | - | 00Cr19Ni10 | ||
| 1.4311 | 304LN | 4311 | 0.02 | 0.14 | 18.5 | 10.5 | - | - | 00Cr18Ni10N | ||
| 1.4541 | 321 | 4541 | 0.04 | - | 17.3 | 9.1 | - | Ti | 0Cr18Ni10Ti | ||
| 1.4550 | 347 | 4550 | 0.05 | 0.14 | 17.5 | 9.5 | - | Nb | 0Cr18Ni11Nb | ||
| 1.4567 | S30430 | 4567 | 0.01 | - | 17.7 | 9.7 | - | 3Cu | 0Cr18Ni9Cu3 | ||
| 1.4401 | 316 | 4401 | 0.04 | - | 17.2 | 10.2 | 2.1 | - | 0Cr17Ni12Mo2 | ||
| 1.4404 | 316L | 4404 | 0.02 | - | 17.2 | 10.1 | 2.1 | - | 00Cr17Ni14Mo1 | ||
| 1.4436 | 316 | 4436 | 0.04 | - | 16.9 | 10.7 | 2.6 | - | 0Cr17Ni12Mo2 | ||
| 1.4432 | 316L | 4432 | 0.02 | - | 16.9 | 10.7 | 2.6 | - | 00Cr17Ni14Mo2 | ||
| 1.4406 | 316LN | 4406 | 0.02 | 0.14 | 17.2 | 10.3 | 2.1 | - | 00Cr17Ni12Mo2N | ||
| 1.4429 | S31653 | 4429 | 0.02 | 0.14 | 17.3 | 12.5 | 2.6 | - | 00Cr17Ni13Mo2N | ||
| 1.4571 | 316Ti | 4571 | 0.04 | - | 16.8 | 10.9 | 2.1 | Ti | 0Cr18Ni12Mo2Ti | ||
| 1.4435 | 316L | 4435 | 0.02 | - | 17.3 | 12.6 | 2.6 | - | 00Cr17Ni14Mo2 | ||
| 1.4438 | 317L | 4438 | 0.02 | - | 18.2 | 13.7 | 3.1 | - | 00Cr19Ni13Mo3 | ||
| 1.4439 | 317LMN | 4439 | 0.02 | 0.14 | 17.8 | 12.7 | 4.1 | - | - | ||
| Urea steel | 1.4435 | 316Lmod | 724L | 0.02 | 0.06 | 17.3 | 13.2 | 2.6 | - | - | |
| 1.4466 | S31050 | 725LN | 0.01 | 0.12 | 25 | 22 | 2.1 | - | - | ||
| Super Austenitic Stainless Steel | 1.4539 | N08904 | 904L | 0.01 | - | 20 | 25 | 4.3 | 1.5Cu | 00Cr20Ni25Mo4.5Cu | |
| 1.4547 | S31254 | 254SMO | 0.01 | 0.20 | 20 | 18 | 6.1 | Cu | 00Cr20Ni18Mo6CuN | ||
| 1.4529 | N08926 | 4529 | 0.02 | 0.15 | 20 | 25 | 6.5 | 1.0Cu | - | ||
| 1.4565 | S34565 | 4565 | 0.02 | 0.45 | 24 | 17 | 4.5 | 5.5Mn | - | ||
| 1.4652 | S32654 | 654SMO | 0.02 | 0.45 | 23 | 21 | 7 | 2Mn,Cu | - | ||
| Duplex steel | 1.4162 | S32101 | LDX 2101 | 0.03 | 0.22 | 21.5 | 1.5 | 0.3 | 5Mn | - | |
| 1.4362 | S32304 | SAF 2304 | 0.02 | 0.10 | 23 | 4.8 | 0.3 | - | - | ||
| 1.4462 | S32205/S31803 | 2205 | 0.02 | 0.17 | 22 | 5.7 | 3.1 | - | 00Cr25Ni5Mo3N | ||
| 1.4410 | S32750 | SAF 2507 | 0.02 | 0.27 | 25 | 7 | 4 | - | - | ||
| 1.4501 | S32760 | 4501 | 0.02 | 0.27 | 25.4 | 6.9 | 3.8 | W | - | ||
| Heat-resisting creep |
Austenitic stainless steel |
1.4948 | 304H | 4948 | 0.05 | - | 18.1 | 8.3 | - | - | 1Cr18Ni9 |
| 1.4878 | 321H | 4878 | 0.05 | - | 17.3 | 9.1 | - | Ti | - | ||
| 1.4818 | S30415 | 153MA | 0.05 | 0.15 | 18.5 | 9.5 | - | 1.3Si,Se | 1Cr18Ni9Ti | ||
| 1.4833 | 309S | 4833 | 0.06 | - | 22.3 | 12.6 | - | - | - | ||
| 1.4828 | - | 4828 | 0.04 | - | 20 | 12 | - | 2Si | 1Cr20Ni14Si2 | ||
| 1.4835 | S30815 | 253MA | 0.09 | 0.17 | 21 | 11 | - | 1.6Si,Ce | - | ||
| 1.4845 | 310S | 4845 | 0.05 | - | 25 | 20 | - | - | 0Cr25Ni20 | ||
| 1.4854 | S35315 | 353MA | 0.05 | 0.17 | 25 | 35 | - | 1.3Si,Ce | - | ||
 Transports---------Container sizes:
| 20ft GP: | 5898mm(Length)x2352mm(Width)x2393mm(High) |
| 40ft GP: | 12032mm(Length)x2352mm(Width)x2393mm(High) |
| 40ft HC: | 12032mm(Lengh)x2352mm(Width)x2698mm(High) |
20feet container load 25tons coils whose length is under 5.8m
40feet container load 25tons coils whose length is under 11.8m
FAQ:
1.Q:Where is your factory located? How can I visit there?Â
  A:Our factory is located in Tianjin China.You can fly to Tianjin airport directly.
2.Q:What is the material of your products?
  A: The material is stainless steel/seamless steel/steel.Can also choose material as customers' requirements.
3.Q:How can I get some samples?Â
  A: We are honored to offer you samples.Â
4.Q:How does your factory do regarding quality control?Â
 A:"Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained BV,ISO9001:2008 authentication. 
  Welcome to contact us in any time, and welcome to our company!Â
Nail Files,Nail Buffer Block ,Curved Nail File ,Ceramic Nail File
Grinding Wheel ,Grinding Wheel Co., Ltd. , http://www.nbsandpaper.com