MODIFIED-ACRYLIC AB ADHESIVE ( DY-J37 )
1. Advantages Of Property
High-strength AB glue using advanced technology. High strength, impact resistance, high and low temperature resistance, can quickly solidify at normal temperature(25ºC).
Â
2. Application
(1). Automobile, motorcycle water tank, fuel tank, oil, carburetor, cylinder head, drain, drive bearing sleeve manufacturing and repair, plastic parts such as baffle, handle.
(2). Decoration industry: metal, wood, plastic and building on the aluminum frame, door frame, staircase protection board bonding, advertising signs and the production of fixed, marble and wood bonding.
(3). Stone processing industry: all kinds of marble, marble bonding, than the silica gel curing time to be faster, easy to operate.
(4). Elevator industry: elevator stainless steel sheet and the adhesion of the ribs.
(5). Furniture manufacturing industry: plastic, metal decorative strip and panel bonding, wood fixed, marble and wood fixed.
(6). Handicrafts, toys, all kinds of jewelry manufacturing industry: ceramic crafts, glass products, shellfish crafts, hair clips and other decorations bonding.
(7). Luggage, footwear industry: luggage box metal or hard plastic plus or decorative strip fixed, boots with hard PVC plastic and PO plastic bonding.
(8). Electronic manufacturing industry: electric motor, magnetic motor magnet on the bonding.
(9). Manufacture of sports equipment: skateboard, fitness equipment installation fixed.
(10). Machinery manufacturing industry: a variety of mechanical parts of the repair, fixed, wear-resistant alloy installation.
(11). Lighting manufacturing industry: all kinds of lighting parts installation.
(12). Chemical pipeline, liquefied gas pipeline plugging repair.
(13). Repair of household items.
Â
3. Technical Parameters
| Color | Viscosity (CPS)(25ºC) |
Mixture | Open Time/100g | Curing Time 25ºC/100g |
Tensile Shear Strength (St-St) |
Heat Resistance (ºC) |
Shelf Life (25ºC) |
| A:Green Translucent | A:3000-6000 | 1:1 | 3 Minutes | Initial Curing 3-6 minutes |
≥20 Mpa | -60 to +100 | 12 months |
| B:Red Translucent | B:3000-6000 | Full Curing 24 hours |
4. Application Method
(1). Surface of adherent has to be cleaned, dried.
(2). A/B components should be mixed 1∶1 in weight in proper amount. Usually, initial curing can be reached within 5-10Minutes(25ºC) and available in 1 hours. full Bonded joint can be used after 24 hours.
(3). After bonding the product, according to the requirements of the bonding process on the treatment, so as not to affect the effect.
(4). This product is partial thick, will be a normal phenomenon and does not affect the bonding effect.
Â
5. Precautions
(1). To keep work site well ventilated and avoid any contact with children.
(2). In case of any contact with skin and eyes during operation, immediately clean them with water or treat them according to doctor's advice.
(3). To store them in dry, cool and well ventilated place far away from high temperature.
(4). To carry out preliminary test in case of batch use to avoid bonding quality due to improper operation.
 
6. Packaging
(1). 10g+10g/pair; 24Pairs/Small Box; 288Pairs/Cartons
(2). 24g+24g/pair; 12Pairs/Small Box; 144Pairs/Cartons
(3). 28.35g+28.35g/pair; 24Pairs/Small Box; 288Pairs/ Cartons
Â
7. Kind Reminder
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, customer need to take a test before batch use. DEYI specifically disclaims any other express or implied warranty of fitness for a particular purpose or merch-antability.
If customer encounter any problem during using, pls contact with us, we will try our best to solve the problems for you.
Shisha Hookah Charcoal,Shisha Charcoal,Hookah Charcoal
Carbon Additive,Activated Carbon Co., Ltd. , http://www.cnactivatedcarbon.com