What are the precautions for using the spectrum analyzer? The spectrum analyzer is a relatively expensive measuring instrument.
What are the precautions for using the spectrum analyzer? The spectrum analyzer is a relatively expensive measuring instrument, mainly used for RF and microwave signal and frequency domain analysis, including measurement of signal power, frequency, distortion and other products. When we use the spectrum analyzer, there are a lot of problems that need to be paid attention to. The following small series will give you a detailed introduction to the use of the spectrum analyzer.
The instrument should be placed on a smooth bed or support surface to avoid accidents such as falls and burns.
Use the distance between the location and the power outlet to avoid pulling the power cord too far.
The radiator assembly should be protected from falling, bumping and falling to avoid damage.
Do not move the instrument position by pulling the power cord.
It is strictly forbidden to use in wet places such as bathrooms.
Do not allow clothing or skin to come into direct contact with the radiator; do not insert fingers or other foreign objects into the protective net cover to prevent burns or electric shock.
Do not cover the instrument with towels, clothing, etc. after power-on, to avoid the danger of temperature rise.
Side armrests must be installed when using the side panels to guard against burns.
After use, wait until the temperature of the instrument drops to room temperature (usually about 20 minutes), and then save it.
When storing in a humid environment for a long time, it should be energized for about 20 minutes at appropriate intervals according to the situation to avoid moisture accumulation.
It is strictly forbidden to press and place heavy objects on the instrument to avoid damage.
After disassembling the package, the discarded packaging should be disposed of in a timely manner to prevent accidental danger (such as swallowing, suffocation, etc.) caused by children playing.
If any of the following occurs, please stop using it immediately, cut off the power supply, and send it to the maintenance department for inspection and repair:
1 The power cord is cut and damaged.
2 The power cord or power plug and the outer surface of the instrument are abnormally hot.
3 After the power is turned on or during use, smoke and burnt smells occur, and the power is turned off immediately.
4 Water or other liquids flow into the instrument. Do not touch the surface of the radiator to prevent burns. instrument
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Plastic Shower Head,Plastic Shower Hose,Pvc Shower Head,Plastic Shower Head Holder
Moon Shower Sanitaryware Co.,Ltd , https://www.moonshowerglobal.com