The variety of stone decoration in the market is dazzling, and the traditional building decoration stone is mostly saturated. Many merchants have taken a different approach and played the concept stone, such as the environmentally-friendly stone and soft-light stone which were very hot before. The transparent stone industry is one of them. Translucent stone sounds very mysterious, but the production process is not complicated.
Due to the development of stone processing equipment and process technology, the production of marble and granite sheets has reached a very high level. “Ultra-thin stone†has been recognized by the stone industry as a new term for stone products. If we define the marble and granite sheets of the previous concept as 6mm~15mm thickness, then the thickness of the ultra-thin stone is as thin as 4mm~6mm or even 2mm, and its area has exceeded the original 300mm×300mm, 400mm×400mm, The 300mm × 600mm conventional size has produced ultra-thin stone slabs with a width of up to 600mm and a length of up to 1800mm, and has formed a large-scale factory production capacity.
Ultra-thin stone combined with other materials is called stone composite board. It is compounded on lightweight materials such as aluminum honeycomb board and aluminum board. It is light stone and weighs only 1/5 of ordinary stone. It is compounded in ceramic tile or low-grade stone. On the top, the added value of the stone is greatly improved; and the composite with the glass is processed into a sapphire stone, and the sapphire stone creates the necessary conditions for the use of the transparent stone decorative technique.
The use of stone translucent decorative effect, previously used only in the production of stone lamps, the earliest is a variety of table lamps, developed to today, stone lighting products are not limited to a single variety of table lamps, stone crystal lamps, all kinds of chandeliers, wall lamps , tombs, etc., variety, beautiful. It can be said that the stone can be made from the glass, and the stone can be made. The decorative method of the translucent stone is to apply the decorative effect of the stone to the decoration of the stone project. In the past, in the combination of stone and light, the light was generally applied from the outside to the surface of the stone, and the light-transparent stone was used to reveal the light from the inside of the stone. The processing technology of translucent stone is to use translucent stone varieties, generally mostly marble, which is made of translucent resin and transparent tempered glass, which is processed into ultra-thin plate of 2mm~6mm thickness, which makes it become composite with glass. Layer composite sheet. Then install it on the back (inside) surface with lights, or you can use the strong natural light of the building parts, artistic lighting (or natural light) from the inside of the stone, or elegant, 朦胧, or bright, fresh, More fully express the natural texture, color and texture of natural stone, maximizing the visual effect of the stone.
The use of translucent stone further enhances the decorative function of the stone and broadens the scope of use of the stone. It can be widely used in building walls, floors, bars, counters, indoor partitions, ceilings, bathroom rooms, bathrooms and other places. At the same time, due to the use of stone shaped processing computer control equipment, the development of various special-shaped stone to ultra-thin, various special-shaped ultra-thin stone can also be made into light-transparent stone, and the first model is thin arc plate and thin column.
There are two main types of raw materials that can be used as translucent stone. One is semi-transparent stone type, generally marble, domestic stone varieties such as: beige series, rosin yellow, Guangxi white, citrine, yellow agate, white crystal, etc.; imported stone The varieties are: Spanish alabaster, Ascott, jazz white, large white. The second is synthetic stone. Synthetic synthetic stone contains a certain proportion of resin. According to the synthetic stone process, only translucent marble stone and translucent resin and light pigment can be used to produce transparent synthetic stone. Sheets have a competitive advantage over natural stone in terms of high-volume production capacity.
At present, domestic stone manufacturers are conquering the technical difficulties in the production of granite transparent stone equipment, diamond tools, etc., in order to make the granite light-transparent stone into mass production capacity. Because the granite is rich in white stone, the light is reflected from the granite stone, the granite composition is mottled, like a cluster of flowers; the quartz particles are crystal clear, like sparkling diamonds, showing the nature of billions of years of calendaring Essence. In addition to the strong decorative function of granite translucent stone, the granite aluminum honeycomb composite panel solves the bearing problem of the dry wall of the stone outer wall, and has broad market potential in the use of the outer wall dry hanging stone.
Not only that, the transparent stone cutting and installation methods are not difficult, generally similar to stone and glass, can be bonded, framed, eye-catching, etc., very easy to install and install. Translucent stone has become a new form of architectural decoration design, providing a new and more extensive creative space for architects' design. The ingenious combination of the two will definitely create a new world of stone decoration.
Diamond Wire For Magnetic Material Cutting
When the electroplated Diamond Wire is cut, the workpiece is scratched by the diamond abrasive particles on the circumferential surface. Electroplated diamond wire cutting is widely used in the field of hard and brittle material processing due to its high cutting efficiency and little damage to raw materials. Compared with other hard and brittle materials, magnetic materials such as neodymium, iron and boron have similarities and differences. Magnetic materials such as neodymium, iron and boron are mostly made by powder metallurgy process, and there are large lattices and voids inside the materials. It has a certain influence on the electroplated diamond cutting wire.
Diamond Wire for Magnetic Material,Diamond Wire Magnetic Material Cutting,Diamond Wire Cutting Magnetic Material
Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com