Bearing in grinding (a)

Source: China Bearing Network Time: 2014-06-26

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The bearing is in the grinding process; the surface of the work is ground by a high-speed rotating grinding wheel; therefore, if it is not operated and adjusted according to the operation instructions during grinding, it will present various shortcomings in the bearing operation; The overall quality of the bearing. The bearing is in the fine grinding; because the rough demand is very high; the grinding marks on the exterior of the work can often be observed with the naked eye.
The reason for presenting the traces of interspersed spirals is that the traces of the casters are poor because of the flatness of the casters; there are embossed appearances; during grinding; the grinding wheel and the workpiece are only slightly touched; when the workpiece or the grinding wheel reciprocates several times; The workpiece embodiment will reproduce the interpenetrating spiral and can be observed by the naked eye. The pitch of these spirals is related to the workpiece table speed and the workpiece rotation speed; together with the grinding wheel axis and the worktable rail are not parallel.
(1) The primary cause of the spiral structure is 1. The grinding wheel is poorly trimmed; the corners are not chamfered; the coolant is not trimmed,
2. The workbench guide guides too much lubricating oil; causing the workbench to float.
3. The machine tool accuracy is not good,
4. Grinding pressure is too large.
(2) The cause of the spiral is composed of 1. The V-shaped guide rail is not well rigid; when grinding, the grinding wheel is offset; only the edge of the grinding wheel and the touch of the work surface,
2. When the quarrel is repaired, the commutation speed of the workbench is unstable; the precision is not high; the trimming of the grinding wheel is slightly less,
3. The workpiece itself is poorly rigid,
4. The sand on the grinding wheel is broken and the iron scraps under the grinding of the workpiece are attached to the outer surface of the grinding wheel; for this purpose, the finished grinding wheel should be washed or rinsed with cooling water.
5. The dressing of the grinding wheel is not good; there are some bumps.
The main reason for the appearance of fish scales to reproduce fish scales is that the cutting edges of the grinding wheel are not sharp; the phenomenon of "squatting" occurs during grinding; the oscillation is large at this moment. The detailed reason for the appearance of the scales of the workpiece is:
1. There are waste and oil on the surface of the grinding wheel.
2. The wheel is not trimmed,
3. The grinding wheel becomes dull. The trimming is not sharp,
4. The diamond fastening frame is not strong; the diamond rocking or the quality of the diamond is not good,
5. The hardness of the grinding wheel is not uniform. The main reason for the retrieving of the fluffing surface on the working surface is that the coarse-grained abrasive grains fall behind; the abrasive particles are formed between the workpiece and the grinding wheel. The detailed reason for the external appearance of the workpiece being roughened during grinding is :
1. Traces left over from rough grinding; not worn out during fine grinding,
2. The coarse abrasive grains and fine abrasive grains in the coolant are not cleaned.
3. When the coarse-grained grinding wheel is just finished, the abrasive particles are simply dropped.
4. The data tolerance is valid or the grinding wheel is too soft.
5. Inappropriate cooperation between abrasive resistance and workpiece data tolerance

Recommend to friends comments close window

Bearing related knowledge

Thrust ball bearing analysis and feature depiction
SKF single row tapered roller bearing minimum load "IKO needle bearing corrosion" should pay attention to the inch inch tapered roller bearing LM48548/10
The basic production process of rolling bearings

This article links to http://
Please indicate the bearing network http://

Previous:Classification of the use of imported bearings Next:How to correct equipment and protection reverse support

Washing Machine Floor Drain

Washing Machine Floor Drain,Washing Machine Cover Drain,Square Washing Machine Floor Drain,Washing Machine Stainless Steel Floor Drain

Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jmkimpowerdrain.com