When it comes to the maintenance of plastic circular loom , I believe many people are not very clear. Today, Jiuzhi Plastics Network Xiaobian tells everyone about the maintenance methods of plastic circular loom, as follows:
1. The cam is the heart of the loom, so it is forced to be lubricated. Therefore, it is necessary to observe whether the lubrication of the cam is good or not, and whether the position of the fuel injection pipe is correct.
2. The lubricating oil in the fuel tank should be replaced every three months. When the newly purchased equipment is used for the first time, it should be replaced with new oil within 7-10 days, and the fuel tank, pipeline and filter net should be cleaned.
3. All transmission mechanisms should be lubricated regularly (3 times a month). Lubricating grease for bearings, gears, sprockets, etc.
4. Regularly check whether the joints are loose or not, especially if the rocker bolts are not loose to avoid breaking the rod.
5. The ship shuttle is one of the important parts of the weaving machine. It should be inspected regularly for maintenance to ensure the quality of the fabric.
Nowadays, the workload of plastic circular loom is very large, so in order to ensure the normal output of the output, it is extremely important for the maintenance of the plastic circular loom. The above is the relevant knowledge about the maintenance of important parts of plastic circular loom. I believe everyone is also aware of it and hope to help the staff in this area.
Komatsu Electrical Parts,Komatsu Forklift Parts,Excavator Electrical Parts,Quality Komatsu Electrical Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com