Nowadays people's living standards are getting higher and higher. Many people have smart toilets in their homes. The toilets have a lot of features and bring many conveniences to our lives. However, the frequency of failures is also high. So, what are the smart toilet repair methods? How to replace the smart toilet seat yourself? Here's just a quick look at Xiaobian.
First, what are the smart toilet repair methods
What are the smart toilet repair methods 1, do not spray water
a. If your toilet cover does not spray water, first check whether the water pipe is broken. If the water pipe is not bad, then look for water. If there is a problem with the water pipe, it is best to take the local maintenance point for repair.
b. If the status indicator of your home smart toilet is on, but it is not working, you can use the remote control to press the automatic water again. If it is not the problem, check whether the water discharging motor and the Hall board have any Bad, if it is broken, contact the factory for replacement, or ask the worker to come to home for repair.
What are the smart toilet repair methods 2, button failure
If you have a smart toilet for a long time, you may experience a key failure. This may be due to a microprocessor failure. You only need to replace it with a new one.
What are the smart toilet repair methods 3, no deodorant
To check why there is no deodorization toilet can be used to exclude, first measure the voltage of the deodorizing fan there is no 12V, if there is no 12V that this fan is broken, replace the fan on it. If it is 12V or more it is a problem with the computer board.
What are the smart toilet repair methods 4, not drying
If the cleaning and lighting are normal, only the drying can not work when you can use a multimeter to measure the voltage of the sensor, if the voltage exceeds 5 V, it means the sensor is broken and you need to replace a seat ring.
What are the smart toilet repair methods 5, seat temperature is not heated
If the seat temperature is not heated, disconnect the heating wire of the seat ring first, and then measure the resistance value of the seat ring. If the resistance at both ends is normal, check whether the plug contact is good, or if you have a new seat at home, you can try it out. Test, if still not heated, it is a problem with the computer version.
What are the smart toilet repair methods 6, the water temperature is high
First, you can put the drain bolt first to see if the water temperature will not exceed 45 degrees. If it exceeds 45 degrees, it means that the temperature-sensitive switch is broken. If you do not want to drain the water from the tank and refill it, then use the remote control to turn off the heating function and measure the voltage on the plug with a multimeter. If there is a voltage, the computer board is broken and the computer board needs to be replaced.
Second, how to replace the smart toilet seat yourself
Step 1: Read the manual of the smart toilet and install the accessories according to the instructions.
Step 2: Position the positioning card at right angles and place it on the back edge of the toilet so that we can fix the card board according to the position of the card.
Step 3: Push the smart toilet seat into the card plate.
Step 4: Turn off the water inlet valve of the toilet, then empty the water in the water tank, and then loosen the inlet of the water inlet pipe.
Step 5: Install the water filter on the joint of the water inlet, and then hit the just-unwrapped inlet joint into the middle of the water filter. Finally, take out the hose and connect it to the water outlet of the water filter. .
Step 6: Open the inlet valve, check for water seepage, and check the ground connection for safety.
Edit summary: The above is on the smart toilet repair method? How to replace the smart toilet with your own hands, I hope to help you, if you want to know more about decoration, you can pay attention to this site.
Insulated Glass,Double Pane Glass,Insulated Tempered Glass,Insulated Window Glass
Huaian Hongrui Glass Co.,Ltd , https://www.hongruiglass.com