Gate connection instructions:
First set the type of control gate (three types of wing gates, swing gates, off swing gates), the person connects to the gate, whether it is the main board or the slave board, the proximity switch on the left is connected to the left, the middle Connect to the zero position, and the right to the right position (note: there are only two positions for the wing gate, zero position and left position, the right position is not used), the left infrared is connected to the left infrared, the middle is the protection clip, and the right is connected to the right infrared. Connect the motor wires casually, and see which side of the motor turns wrong when you turn on the power.
Gate setting parameter description:
The default state is displayed on the LCD screen after the control panel is powered on. The default state displays the "working mode" (three working modes of swing gate, off swing gate, and wing gate) of the control panel at this time, as well as parameters such as the number of exits and entrances.
There are 5 operation buttons on the control panel, "Menu", "Up", "Down", "OK" and "Cancel".
Menu operation:
Press the “Menu†key to enter the password input interface. The default password is: up, down, up and down. Enter the 6-digit password and press "OK" to enter the menu. After entering the menu, press "Up" and "Down" to select a function menu and then press "OK" to enter the function or value change interface, and select or adjust to the corresponding value by pressing the plus and minus keys.
Example: To change the working mode of the gate: Enter the menu, select "Working mode of gate" in the menu-press "OK" (display the current working mode)-press "OK" to enter the interface for modifying the value-press "" Or "Next" selection-press "OK" to modify successfully-after setting is completed, press "Cancel" to exit (without pressing the Cancel button, the system will automatically exit after 15 seconds).
System menu description:
"Configuration of entrance and exit direction":
Set whether the left side of the gate is the entrance or exit; the right side is the entrance or exit.
"Access Configuration":
Set whether the two sides of the gate (entrance and exit) are allowed to pass.
"Working mode of gate"
Set the opening method, whether it is infrared opening or swiping.
"Access Memory Configuration"
Whether it has a memory function when opening or closing the entrance and exit, generally used to open the gate when the card is swiped, whether one person remembers the card swipe situation of another person when the card swipe has not passed. "Prohibited" means that the second person can only be valid after the credit card is passed; "Allowed" means how many individuals are allowed to pass the card. 
S.S Braided Hose,Water Tap Hose,Flexible Braided Hose,Stainless Steel Braid Hose
kaiping aida sanitary ware technology co.,ltd , https://www.kpfaucets.com