The voltage transformer loop disconnection phenomenon is:
1. The active power meter indicates an abnormality, the voltmeter indicates zero or the three-phase voltage is inconsistent, the electric energy meter does not turn or rotates slowly, and the low voltage relay operates.
2. When the high-voltage fuse is blown, there may be a grounding signal. The insulation monitoring voltage is lower than the normal value, and the indication on the normal phase monitoring voltmeter is still normal.
3. The “voltage transformer circuit disconnection†light plate is on, and the alarm bell rings.
The reasons for this are:
1. The first and second side fuses of the voltage transformer are blown.
2. The voltage switching circuit auxiliary contact and the switch are in poor contact.
3. The wire joints in the circuit are loose or broken.
Approach:
1. Carefully check if the high and low voltage fuses are blown. If the high-voltage fuse is blown, pull off the voltage transformer isolation switch, remove the low-voltage fuse, replace the high-voltage fuse after the test and discharge, and measure the insulation of the voltage transformer. After confirming the pass, the power can be restored. If the low-voltage fuse is blown, it can be used after replacing the fuse. After the fuse is replaced, it will be blown again. It is necessary to further find out the cause and replace it after processing.
2. Disable relevant protection and automatic devices to prevent protection from malfunction.
3. If there is spare equipment, the faulty equipment should be deactivated and immediately put into standby equipment operation.
Concerned about surprises
Label: Voltage transformer loop disconnection analysis
Previous: Basic structure and classification of power cable Next: Introduction of plastic die casting process
The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , http://www.chuangruipump.com