1. Stone engraving machine acrylic cutting processing, it is recommended to use single-blade spiral milling cutter. It features smokeless and odorless processing, fast speed, high efficiency, no sticking, real environmental protection, and its special manufacturing process guarantees processing acrylic. No blast, very fine knives (even without knives), the surface is smooth and flat. The surface needs to be frosted. It is recommended to use a double-edged three-blade spiral milling cutter.
3. For the engraving of aluminum engraving machine, it is recommended to use a single-blade special aluminum milling cutter. It does not stick to the knife during processing, and it has high speed and high efficiency.
2. Stone engraving knives MDF cutting processing (for advertising mold opening), it is recommended to use double-blade large chip spiral milling cutter, which has two high-capacity flutes and granite double-edged design, which has good chip removal. The function also achieves a good tool balance. When processing high-density boards, it does not black out, does not wear a cigarette, and has a long service life.
4. There is no burr cutting processing on the stone engraving machine. It is recommended to use single-blade, double-edged upper and lower cutting cutters.
6. Stone engraving machine 3D engraving knives, high concentricity, sharp edge, can do precision 3D engraving processing.
5. Stone engraving machine metal engraving processing, it is recommended to use a single-blade, double-edged straight groove flat-bottomed sharp knife.
7. Stone engraving machine high-density board, solid wood is recommended to use a prismatic milling cutter.
8. Stone engraving machine multi-layer board, plywood processing, it is recommended to use double-blade straight slot milling cutter.
9. Stone engraving machine precision small relief processing, it is recommended to use a round bottom knife.
10. Stone engraving machine cork, MDF, native wood, PVC, acrylic large deep relief processing, it is recommended to use single-blade spiral ball end milling cutter.
11. The use effect of the cutting knife under the stone engraving machine, the upper surface of the processed product has no burrs, and will not be rocked when processed.
12. Stone engraving machine metal mold processing milling cutter, it is recommended to use tungsten steel milling cutter, the surface is plated with purple black and hard titanium.
13. Stone engraving machine Acrylic mirror engraving processing is recommended to use diamond engraving knives.
14. Stone engraving machine rough processing particle board and other recommended multi-strip milling cutter.
Chemical intermediates and chemical raw materials
Guanidine nitrate is a white crystalline solid. Soluble in water. Takes some effort to ignite but once ignited it burns with increasing vigor as the fire progresses. If contaminated with combustible materials it accelerates their burning. Prolonged exposure to fire or heat may result in an explosion. Produces toxic oxides of nitrogen during combustion.
Guanidine nitrate is a strong organic base existing primarily as guanidium ions at physiological pH. It is found in the urine as a normal product of protein metabolism. It is also used in laboratory research as a protein denaturant.
Chemical Intermediate,Dcda For Chemical Intermediate,Dicyandiamide For Chemical Intermediate,Pharmaceutical Intermediates Dicyandiamide
NingXia Yuanda Xingbo chemical CO.,LTD , http://www.ydxbchem.com