Below are the details of the LH-16RGPS
Second, electrical performance parameters 2.1 , communication module
1 , the communication module is adopted  Huawei EM310
2 , working frequency band EGSM900/GSM1800 dual frequency
3 , receiving sensitivity
4 , temperature range: -20 ° -70 °
2.2 , positioning module
1. Positioning module adopts: SIRF III
2 , sensitivity -159dBm
3 , start time  Hot start (open area)
4 , cold start (open area)
5 , accuracy
6 , GPS channel: 20 channels
7 , temperature range: -40 ° -85 °
2.3 , machine parameters
1. Volume : 100mm*86mm*35mm (length * width * height) (width without antenna interface)
2. Color : silver gray .
3. Weight : 600G
4. Input voltage range : 10V~36V DC
5. Working current : 50-80mA @12V DC
6. Working environment : -20~+70°C
7. Backup battery life : 1 hour
8. Communication method: TCP , UDP
Third, the function details 3.1 , query function 3.1.1 , location query
After receiving the location query command, the terminal returns the current location information of the vehicle. The location information mainly includes: time, longitude, latitude, speed, azimuth, positioning mark, vehicle and terminal status.
3.1.2 , query vehicle status
After receiving the parameter status query command, the terminal returns the current status information of the vehicle. The status information mainly includes: location information, vehicle status, terminal status, setting parameters, mileage, and the like.
3.1.3 , query vehicle parameters
The landmark machine can also query the VIN , license plate number, vehicle type, driver account number and type.
3.2.5 , query timing monitoring
Query the location of the terminal device and the timing monitoring parameters that have been set on the device.
3.1.4 Querying the terminal version
After receiving the version query command, the terminal returns the current version information of the vehicle. The version query includes: terminal model, main chip type, software version, and software release time.
3.1.5 , query vehicle history track
The location information of the vehicle during historical driving is recorded and stored in the server's database. The position data that the vehicle required for the inquiry has traveled for a certain period of time can be screened according to the time, and can be played back in a manner with the track.
3.2 , setting 3.2.1 , ACC timed return location information interval setting
Including the time interval for returning position information during ignition  with  The time interval for returning position information when the flame is turned off.
The time interval for returning the position information when the ACC is ignited, the terminal defaults to 30 seconds.
The time interval for returning the position information when the ACC is turned off, the terminal defaults to 6 minutes.
3.2.2 , overspeed alarm gate valve setting
After setting the overspeed alarm threshold, an overspeed alarm is generated when the vehicle's travel speed is greater than the vehicle's set threshold and the contact duration exceeds 10 seconds. The overspeed alarm gate threshold is greater than 10KM/H .
When the setting value is 0 , the terminal turns off the overspeed alarm function.
The terminal is factory-off by default.
The set threshold value is set to 1-255km/h , the duration is 1-255 seconds, and the default duration is 10 seconds.
3.2.3 , parking timeout alarm door valve setting
After the timeout alarm threshold is set, when the running speed of the vehicle is 0 , and the time continues to exceed the alarm threshold value set by the vehicle, the timeout alarm occurs. When the timeout alarm threshold is set, it is effective to set the gate value greater than 1 minute.
The terminal is factory-off by default (that is, the setting value is 0 )
3.2.4 , electronic fence settings
The terminal supports up to 30 electronic fences. The fence is in the range of rectangles. A message will be uploaded to and from the fence terminal.
3.2.5 , IP and port settings
The center can change the IP number and port number of the terminal at any time. The new IP and port number set by the terminal after the change will take effect immediately after the terminal is restarted.
3.2.6 . Remote download of the PBX number
After downloading the group number, the terminal can only dial and answer the number in the group number. Supports up to 40 numbers.
This function is only available when an external handset phone or display is required. The group number is stored in the handset or display.
3.2.7 , timing monitoring settings
The center sets the terminal timing monitoring parameters (the terminal defaults the timing monitoring function ) , and can set the timing monitoring setting of the interval of 1 to 255 seconds. The default is 30 seconds. The terminal sends a 1-10 satellite positioning to the center one frame data packet. data.
3.2.9 , distance monitoring settings
The center sets the terminal timing monitoring parameters (the terminal defaults the distance monitoring function ) , and can set the distance monitoring settings from 50 to 9999 meters apart. The default is 100 meters. The terminal can send 1-10 items in one frame of the center. Satellite positioning data.
3.2.10 , setting the transparent transmission mode
3.2.11 , setting the connection method
Set the GPRS connection mode of the terminal, which is divided into UDP , TCP or DUP+TCP .
Set the vehicle system sensing coefficient
Set the speed sensor transmission coefficient * , HEX value * the number of pulses output per kilometer of sensor.
3.2.11 , fatigue driving settings
5 minutes per unit arranged to set the driving time in the range of 5 * 255 to 5 minutes fatigue driving time is set to 0 to turn off the function.
3.3 , control 3.3.1 , remote restart
After the center sends a remote restart command, the terminal will automatically power off and restart. This command is mainly used when the communication is normal and other work is not normal, let the terminal power off and restart. To ensure that the terminal can work properly.
3.3.2 , remote control oil circuit
Mainly divided into broken oil road and recovery oil road.
After the center sends out the oil circuit command, the terminal directly cuts off the vehicle oil circuit and turns it off.
After the center issues the recovery oil circuit command, the terminal restores the vehicle oil circuit.
3.3.3 , sending and receiving scheduling information
Both the center and the terminal can communicate by sending short messages. The terminal can receive up to 120 Chinese characters. This function can be realized by an external display or a handle phone. The encoding of the information is in GB2312 format.
3.3.4 , remote monitoring
This function must be implemented with an external microphone or a handle phone display, etc. with MIC .
When the center sends a monitoring command, it will prompt for the number to be monitored (can be a mobile phone). After receiving the terminal, the terminal on the vehicle will dial the number actively. After being connected, the receiver can monitor the situation in the vehicle. The monitoring is one-way. This function does not support the extension number.
3.3.5 , support remote software upgrade
Must cooperate with the manufacturer.
3.3.6 , remote control self-test equipment
The center sends the device self-test command, and reports the startup information when the next startup or does not report the startup information and the positioning report startup information at the next startup.
3.4 Alarm 3.4.1 , overspeed alarm
After setting the overspeed alarm gate threshold, when the vehicle's running speed is greater than 10kM/h and is greater than the gate valve, an overspeed alarm is generated, and the overspeed alarm flag is included in the position information.
Alarm mode: When the alarm is generated for the first time, a message is immediately uploaded. In the future, it will be uploaded 5 times according to the time interval of the scheduled return.
Cancel the alarm mode: The cancel alarm command is issued and the vehicle travel speed is less than the overspeed alarm gate threshold.
The cancel alarm command is issued and the overspeed alarm is turned off.
3.4.2 , parking timeout alarm
After the timeout alarm threshold is set, when the vehicle's running speed is 0 , and the time continues to exceed the timeout alarm threshold, a timeout alarm is generated. The timeout alarm flag is included in the location information.
Alarm mode: When the alarm is generated for the first time, a message is immediately uploaded. In the future, it will be uploaded 5 times according to the time interval of the scheduled return.
Cancel the alarm mode: the cancellation cancels the alarm command and the vehicle travel speed is greater than 0 .
The cancel alarm command is issued and the parking timeout alarm is turned off.
3.4.3 , GPS antenna open circuit short circuit alarm
The GPS antenna status flag is included in the location information. Upload according to the timed interval.
3.4.4 , terminal main power failure alarm
When the main power supply of the terminal is disconnected and the terminal will actively report the main power failure alarm, the power failure alarm status flag is included in the position information and is uploaded according to the time interval of the return.
3.4.5 , custom alarm (high and low sensor alarm)
The sensor alarm status flag is included in the location information. Upload according to the timed interval.
3.4.6 , robbery / help alarm
The robbery / help alarm flag is included in the location information. When the alarm button is pressed for more than 0.5 seconds, an alarm is generated if there is no robbery / help alarm status. If the alarm is in the state, the alarm is cancelled. The button light will be on for a long time when the alarm occurs. When the cancellation is cancelled.
Alarm mode: When the alarm is generated for the first time, a message is immediately uploaded. Later, it will be uploaded according to the time interval of timed return.
Cancel the alarm mode: The center sends a cancel alarm command.
3.4.7 , entering and leaving the fence alarm
After setting up the electronic fence. A message will be uploaded to and from the fence terminal.
Alarm mode: Trigger, a prompt message will be generated immediately upon exit or advance.
3.5. External serial port, part of external device description 3.5.1 , image acquisition or meter interface ( RS232 interface)
Support 0706 photographic processing chip, providing a variety of photo options
Resolution 640x480 , 320x240 , 160x80
Support multiple shots at a time ( Â The default is 5 continuous shooting, the maximum limit for continuous shooting is 10 )
Data compression has three levels of compression to provide different customer needs
3.5.2 , mileage statistics
Cumulative sum of GPS position movement, in units of 100 meters
Statistical conditions: car ignition and GPS effective positioning.
3.5.3 , blind zone supplement
When the vehicle is in the GPRS signal blind zone, the terminal will automatically save the location data according to the timed return time (in the state of the car ignition). When the vehicle receives the GPRS signal, the terminal will automatically upload the data stored in the blind zone to the center. Store up to 11,000 pieces of data.
3.5.4 , transparent transmission interface (ie image acquisition interface and handle interface)
This type of terminal reserves two transparent transmission interfaces, and users can obtain secondary development of original data development and compatibility.
3.5.5 , reading accident suspect data
Read the speed and brake signal, the remote turn off lamp, the left and right turn signal, the switch door, ACC and other signal data 20 seconds before the accident.
3.5.6 , report before printing
The terminal reports the data to the center before printing.
3.5.7 , drive recorder function
The device records the recorder speed, GPS speed, latitude and longitude, oil circuit, emergency alarm, overspeed alarm, vibration alarm, main power failure, brake, door edge line, left turn signal, right turn signal, high beam during vehicle driving. Light, ACC, etc.
The device can store tens of thousands of recorder data.
Features:
1.HOT dipped galvanized or Q235 Steel, with excellent outdoor and marine environment protection
2.Compact for those smaller areas
3.Provides shading for your car or backyard needs
High strength galvanized steel structure, able to withstand 110mph wind, with Aluminum and Stainless steel supports
for solar panels.
4.Configuration: Single vehicle carport, with single cantilever side support gives aesthetically pleasing appearance.
Benefits of Using Honde Solar Carport Mounting Solutions:
Standard installations maintain 8'-6" minimum clearance
Three parking spots spanned between posts
Custom designs available
Foundation and installation options available
Readily tailored to fit different modules and parking lots
Industry-leading 20-year warranty on all our carport installations
Water control with decking available
No field welding, drilling, or other on-site fabrication
Multiple coatings options:
Hot dipped galvanized
Epoxy coated
Wide selection of pre-engineered designs:
Single-slope structures
Double-slope structures
Inverted design
Solar Mounting System For Carport
Solar Panel Brackets,Carport Solar Mounting System,Solar Racking System,Mounting System for Solar Panels
Hebei Honde Plastic & Metal Co., Ltd. , http://www.foundation-system.com