One, Â Â Â Â Â Â Â Material drying requirements:
1 , Â Â Â Â Â Â Â Â Â Â Â Initial water: W1=80% ;
2 , Â Â Â Â Â Â Â Â Â Â Â Final moisture: W2=12% ;
3 , Â Â Â Â Â Â Â Â Â Â Â Yield: G=4T/D ( calculated in 20 hours a day );
4 , Â Â Â Â Â Â Â Â Â Â Â Heat source; coal-fired hot blast stove;
5 , Â Â Â Â Â Â Â Â Â Â Â Material: The material is made of 304 stainless steel;
two, Â Â Â Â Â Â Â Drying equipment selection and main technical parameters
1. Overview of equipment selection: 15951225606
According to the company's experience in drying equipment for similar materials, the belt dryer will dry the material to the required final water content in several stages due to the different rates of evaporation of water at different stages of the drying process. The system consists of a conveyor belt and a first-stage belt dryer. The feeding conveyor system feeds the material evenly into the first-stage drying belt machine. The first-stage drying belt machine removes most of the surface and free water of the material. Drying from about 80% to about 30% ), using medium-low temperature and high-volume drying operation, guiding most of the water, which can remove most of the water from the material and avoid conjunctiva on the surface of the material. Subsequent drying operations lay the foundation. The material enters the slow-release conveying section from the first-stage belt machine. Since the first-stage dryer mainly evaporates the surface water and free water of the pepper, the internal moisture should migrate to the surface to evaporate in time, and the material is relieved in slow release. The section transfers the internal moisture to the surface and then enters the second-stage belt dryer for final drying (water is dried from about 30% to about 12% ).
Cold water basin tap is popular in tropic countries, like Ecuador, Colombia, Kenya, Angola, Tanzania, Sri Lanka etc. The main body is made of high purity copper casting with grade A standard (national standard 59-1). The surface of the faucet use 5 - layer electroplating process, and the coating is still bright after 48 hours of salt fog testing. Install, repair or change cold water basin tap is easy.
Single Hole Basin Mixer,Vessel Sink Mixer,Antique Basin Mixer,Concealed Basin Mixer
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , http://www.handyfaucet.com