In recent years, the most complaints in the sanitary industry are hardware accessories. The lack of sufficient attention of enterprises is also one of the main reasons for the low pass rate of sanitary fittings in bathroom hardware over the years. According to industry sources, at present, domestic sanitary wares are comparable to international brands in terms of product appearance, function settings and overall quality. The only regret is that there is still a certain gap in service life. According to Xiaobian Building Materials Network Xiaobian, and for sanitary products, the key factor determining the service life is the hardware water.
Bathroom hardware is generally divided into three components. That is, the base (fixing member), the connecting member, and the functional member; one side of the base is close to the wall surface or the surface of the board, and this surface is generally not surface-treated. You only need to look at the color of it to basically know what material is used; the connecting parts are basically surface treated, and only the following methods can be used; most of the functional parts are mainly tubular and rod-shaped raw materials. If the tube is inside, the inner wall can generally be seen. Because the specific gravity of the raw materials is different, the weight of the objects with the same volume is different (except for lightweight materials). At present, the bathroom hardware pendants on the market mainly have the following materials:
1, stainless steel (there are relatively few such products on the market). Advantages: Not afraid of wear and tear, no rust. Disadvantages: single style, workmanship (and it is difficult to guarantee the quality of stainless steel).
2, copper chrome plating (now on the market is basically based on such products, the rod is divided into hollow, solid two, electroplating is divided into two kinds of bright and frosted). (1), hollow copper chrome plating (mostly round rods, thick square rods are also): advantages: more styles, moderate price. Disadvantages: fear of wear and tear, the best electroplating will also fall off in humid environment all the year round, some small manufacturers in order to lower the price, the plating layer is very thin, it will not take long to electroplating will fall off.
Easy to deform, the regular manufacturers generally do not have this problem! But some manufacturers use the tube to see a thicker, but the wall is very thin, the use is broken (it is recommended to press hard when pressing, easy to bend). (2), all copper solid chrome plating (generally square tube, some in order to prove that it is solid, specially twisted several flowers at both ends of the rod): advantages: fine workmanship, thicker plating layer, durable. Disadvantages: the price is high, the style is not as hollow as the one.
Concerned about surprises
Label: bathroom industry short-lived mystery
Previous: Buy plate furniture hardware accessories, remember "Wang Wen asked cut" Next: (é’• (Nd)) Origin and use of rare earth elements
The Fiber Laser Cutting Machine adopts servo motor bilateral driving. The whole machine is compact in structure, good in overall rigidity, stable in accuracy and performance. The equipment processing replaces the traditional mechanical knife with invisible beam. It has high processing precision, fast cutting and no damage to materials. The surface can be processed with any pattern. It is used for cutting and cutting carbon steel, alloy steel, stainless steel, copper, aluminum and galvanized sheet. It is a high-tech product integrating advanced technologies such as laser technology, mechanical technology and numerical control technology.
Performance characteristics:
1) The closed fiber Laser Cutting Machine has low cost and consumes less power,it can blow air to cut all kinds of metal sheets
2) High performance, imported fiber laser, stable performance, long service life.
3) High speed, high efficiency, up to 100 meters per minute.
4) Lasers are maintenance-free.
5) The cutting quality is good, the deformation is small, the appearance is smooth and beautiful.
6) The use of imported guide transmission mechanism and servo motor, cutting precision.
7) Can desian any kind of graph or text to cut at will, the operation is simple, flexible, convenient.
Fully Enclosed Fiber Laser Cutting Machine
Fiber Cutting Machine,Fully Enclosed Cutting Machine,Die Board Laser Cutting Machine,Fully Enclosed Fiber Laser Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com