Toilet ware bathroom is one of the three, is an important material for bathroom decoration; so, what good does the toilet? What needs to pay attention to the toilet purchase? Let's take a look with Xiaobian.
What toilet is good
What toilet is good, whether the toilet flushes clean?
The reason why the flush is not clean is because the quality of the glaze is not good and the water absorption rate is high and it is easy to hang the dirty. The big brands of products have good material selection and high firing temperature, so they have low water absorption, they are not easy to catch dirty, and they can be rinsed clean.
What toilet is good, choose the toilet pit distance?
The distance between the pits of the toilet is 200mm, 305mm, 400mm, 580mm, etc. The thickness of the tiling should be considered when measuring the pit distance. The diameter of the downpipe is generally 110mm, the outlet diameter of the Franc is 70mm, and the middle 40mm can be adjusted.
What toilet is good Third, whether the toilet water-saving?
The water-saving performance of the water part is good, so it will not leak water, and there are double-shift keys, flushing the size.
Poor drainage capacity, poor quality glazed toilets, after a long time, the pipeline is not smooth, need to flush many times.
The water-saving effect of the flush-type toilet is better than that of the siphon type. In addition, the flush-type toilet can put the water bottle into the water tank to achieve more water saving, but the siphon type cannot do so.
What kind of toilet is good, the toilet is easy to plug?
There are several reasons why it is easy to clog: The quality of the glaze is low, and it is easy to hang the dirt and cause blockages. It is not a full-pipe glazing and the pipes are easy to hang dirty; the pipes are small and it is not easy to wash away the dirt. In general, the straight-through pipes are larger, the siphon pipes are smaller, and some brands of siphonic toilets have a pipe thickening technique.
What kind of toilet is good? 5. Is the toilet flush or siphon?
1, select the straight flush toilet
Your home is an old house. The sewer used is cast iron and you should choose to use the straight flush type.
If you have a habit of pouring water or throwing debris into your seat, you may consider choosing a straight flush pipe, which is usually more than 7cm, and it is not easy to block.
2, choose siphon toilet
Your house is a new house. The sewer used is made of PVC and you like to mute. You will not affect your family when you go to the toilet in the evening. You may consider choosing a siphon type (Siphon's national standard for pipe diameter is 4.1cm or more).
What toilet is good six, what is the protection of the toilet?
Good after-sales service for toilet companies:
1, will be responsible for on-site installation and maintenance, regular consultation with the customer's use of the situation, and better, there are regular home cleaning.
2, the product during the warranty period can be exchanged for problems.
3, due to product quality caused by the problem, after sales will be responsible for handling.
4, altar toilet water parts of non-human problems can be replaced.
5, after the warranty period, product parts need to be replaced only charge cost.
6, the customer's product problems after the sale will be dealt with immediately.
The above notes about what toilets and toilets are important to review here, and I hope to help you. For more information, please visit this website. Stay tuned.
Toilet
Hy-Rib Lath is also called construction hy Rib Lath , Cement Wire Mesh , hy rib lath, and galvanized rib lath.
| Material | Thickness(mm) | width(mm) | length(mm) | measurement(m2) |
| bright sheet | 0.1 | 450 | 2000 | 0.9 |
| bright sheet | 0.13 | 450 | 2000 | 0.9 |
| bright sheet | 0.15 | 450 | 2000 | 0.9 |
| Electro galvanizing | 0.1 | 450 | 2000 | 0.9 |
| Electro galvanizing | 0.13 | 450 | 2000 | 0.9 |
| Electro galvanizing | 0.15 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.16 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.2 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.23 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.25 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.3 | 450 | 2000 | 0.9 |
| hot galvanizing | 0.35 | 450 | 2000 | 0.9 |
HY-rib Lath
Hy-Rib Lath,Rib Lath,Rib Lath Mesh,Ribbed Metal Lath
CSTAR WIRE MESH ENTERPRISES CO., LTD. ,