Now we will not forget to paste the wallpaper when we decorate, and many families have chosen to do it themselves, because we do not understand the decoration technology is very easy to twist the wallpaper stickers. In order not to have such a problem, how should we paste the wallpaper correctly? Do you know how to paste the wallpaper? Today, Xiaobian will take a look at the precautions of how to stick the wallpaper and paste the wallpaper!
How to stick wallpaper
(1) Fill the wall with a grout and fill the wall with a spatula.
(2) Measure the size of the wall, and then measure the wallpaper based on the wall area. Pay attention to the length of the wallpaper, which is 5Cm more than the actual surface.
(3) Then add the powdered wallpaper glue to the water to reconcile the general wallpaper to 1:3, the foamed wallpaper to 1:2, or use the special glue for wallpaper without modulation, and use the special glue for the wallpaper with the roller brush Even brush on the back of the wallpaper
surface.
(4) Then, the wallpaper is placed on the wall, and the brush is flattened from the top to the bottom with a wooden handle, and the wallpaper is leveled.
(5) When encountering the power switch or socket, first cover the wallpaper and then brush it with a wooden handle, then use the utility knife to draw a cross on the diagonal, use the scraper to resist the edge of the switch, and use the utility knife to cut the path. Go to the extra part.
(6) If the wallpaper is connected by the printed wallpaper, find the consistent position of the pattern at the junction of the two wallpapers, and the overlap is about 12cm wide. After the whole wallpaper is aligned, use the scraper to resist, and then cut the overlapping part with the blade. Just fine.
(7) When attaching wallpaper, pay attention to sticking from top to bottom. If you find that the floating patch is uneven, you can use a towel to wet it, then re-level with a scraper.
(8) Finally, the wallpaper around the doors and windows is processed, and the method of processing the wallpaper at the power switch is the same.
(9) After the wallpaper is pasted, the original device is replaced.
Self-sticking wallpaper notes
1. Pay attention to the proportion of putty and glue when handling the wall before the wall is applied. The yin and yang angles are straight and polished.
2. After the wall surface is polished, the floating ash after the wall surface is polished in front of the base film is cleaned as much as possible.
3. Brush the base film to buy a good quality, the base film should be as dry as possible after brushing.
4. Ask the professional to measure the area before buying the wallpaper, (due to the waste of the wallpaper), to avoid the paper is not enough, the delivery is a waste of time!
5. Always brush the top coat before the sticker. Wall switches and sockets can be installed or not. It is best to install the baseboard, door and window cover first. Because the wall is not flat after the installation, the seam should be smoothed before the sticker.
6. When cleaning the wallpaper, be sure to clean the glue at the seam. Try not to open the window when the sticker is attached, and it is not advisable to open the window after it is attached. Wait 3-5 days for the wallpaper glue to dry completely before opening the window.
Self-posting wallpapers are actually very simple, but we need to control the paste method to complete quickly. The above is the small series of self-adhesive wallpapers that are introduced to you today. The notes on how to paste and paste wallpapers are here. To learn more, please continue to pay attention to the decoration home.
Pc Film is the abbreviation of polycarbonate film, which is an amorphous, odorless, non-toxic, highly transparent colorless or yellowish thermoplastic engineering plastic.
advantage
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength, and compression strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, and size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120℃; no obvious melting point, in a molten state at 220-230℃; high rigidity, high resin melt viscosity; low water absorption, low shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil and acid resistance.
Disadvantage
The fatigue strength is poor, stress cracking easily occurs, and the wear resistance is poor. Poor resistance to solvents, not resistant to strong alkalis, oxidizing acids, amines and ketones, soluble in chlorinated hydrocarbons and aromatic solvents, and prone to hydrolysis and cracking in water for a long time.
pc film classification
PC films are divided into: halogen-free flame-retardant PC, black flame-retardant PC, transparent flame-retardant PC, frosted PC, transparent PC, hardened PC, scratch-resistant PC, scratch-resistant PC, printing-grade PC, optical-grade PC
pc film use
1. Flame-retardant pc film is used for power system insulation, disk drive insulation, keyboard insulation, TV/display insulation, and computer motherboard insulation. It is widely used in electronic components, electrical enclosures, switch panels, junction boxes and charger enclosures, automotive instrumentation and panel printing with flame-retardant requirements.
2. Printing grade frosted pc film is suitable for special printing, helmets, signs, nameplates, protective covers, etc.
3. Anti-scratch pc film Uses: window lenses for mobile phones, MP3, MP4, DVD, backlight and other electronic products
Pc Film,Pc Sheet Film,White Pc Film,Printing Pc Film
Shandong Top Leader Plastic Packing CO., LTD , https://www.sdzlplastic.com