New Epoxy Polyester Powder Coating Powder Paint

Epoxy polyester powder coating

1.General introduction:

    Epoxy polyester powder coating is made of polyester resin and epoxy resin.It has a wide range of applications. 

2.Applicable occasions:

  appliance industry, lighting, steel furniture,machines and so on.
    
3.Product series: 

  The product includes standard and low temperature curing types.
   We Provide high light (above 86%), plain glass(76-85%), matt (20-50%) and low light (below 20%) of the full-color powder coatings products.Gloss can also be controlled according to the user's requirements.
    
4.Packing:

  Carton packaging, lined with double polyethylene bag, net weight 20 kg.
    
5.Storage requirements:

  Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined,such as the results meet the requirements, can still be used.
    
6.Powder physical properties:  
 
       Proportion : 1.1-1.8 (depending on the color and gloss ) 
 
       Particle size distribution: 100% less than 125 microns(more than 85% between 60-90).

       Liquidity:18~35mm.

       Curing conditions:180°C,15minutes.

7.Average coverage:

   8-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).

8.Health and safety:
 
  This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.

9. Coating performance
 
10.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company. 
2). The material we choose is always good and products always come out with high quality. 
3). A trial order or sample orders are welcomed. 
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world. 
5). We will do our best to service you all the time if you have the further question.

11.MSDS for powder coating.
 

12.We have our own factory, 8 production lines and a complete set of testing equipment.


13.We will arrange for SGS testing at regular intervals. In order to confirm our products meet the environmental standards.


14.We do many certifications to confirm every parts meet the national standard.


15. We have exported to many countries, and getting unanimous praise. Also many customers visited our company.

 

 

 

We have been manufacturing varity of Ceramic Rods with a selective of raw material, different specification & design, different surface treatment.

It can be produced via hot pressing, dry pressing, Injection molding and so on. Also our in-house machining equipments helps to achive different level precision of dimensions.

All these ceramic rods have a remarkable electrical insulation, excellent high temperature resistant, chemistry resistance, wear resistance and so on. It's widely used in many different electrical, electronic appliance.

Ceramic Rods

Ceramic Rods,Alumina Ceramic Rod,Zirconia Ceramic Rod,Insulation Steatite Ceramic Rod

Jinghui Industry Ltd. , https://www.ceramictek.com