First, the principle of security gate by the crystal oscillator 3.5-4.95M sinusoidal oscillation, frequency divider by 7.8K or so sine wave, after the transistor and the coil for power amplification input gate (7 area) large coil electromagnetic emissions, from The coils in the 1-6 zone of the door are received separately. After receiving, the received signal is compared with the reference signal. After the change is found, the output level of the acquisition card is changed. The CPU scans the data of the 6-bit acquisition card within 300 milliseconds to determine the location of the metal and display the output. Metal gates regroup the original spherical edged, less stable magnetic field into a new, more stable magnetic field, which means that the metal gate has greater stability than other materials. This is the advantage of metal doors: with gold, increase sensitivity and stability. Second, the structure 1, the door structure: consists of a large coil, 6 small coils, compensation coils and graphite. 2. Chassis structure III. Workflow during detection CPU detection → A group of infrared is blocked → Detect whether the data of each acquisition card changes → Alarm → Detect another group of infrared → Reset Redetect. Fourth, the use of different occasions Note 1, the factory anti-theft: 1 installation is solid, try its best to recommend that it is installed in areas away from high-frequency equipment, in order to avoid false positives and reports from interference. 2 rain, sun protection, outdoor installation, it is best equipped with awning and other facilities to increase the service life. 3 Try to stay away from large metal objects during installation. 4 Avoid moving nearby metal objects. 2. Entertainment venues (public places): The installation is stable and can meet the room requirements. (Stability>Sensitivity), adjust from the lowest sensitivity when adjusting. V. Commissioning instructions: Debug from low sensitivity to high sensitivity, that is, set the sensitivity of the door first, fail to detect the object, no alarm, and then increase the sensitivity in a single area in order to detect the required items. Sixth, common problems and solutions: 1, can detect objects: general easy to magnetic metal, that is easy to be magnet adsorption objects, such as silicon steel, iron, copper, alloys and other objects. However, if the objects are scattered, such as powdered metals, wire-shaped metals, etc. are not easily detected. Metals can be detected on a one-dollar coin. If customer materials are special, samples can be requested for testing. 2. Frequently Asked Questions: A: Installation: Distinguish between the left and right door panels, left (4P plug), right (3P plug), firmly plugged in, cannot be reversed. B: When the alarm is not detected, check whether the intensity is always on and the infrared count is normal. Specific issues: (1) Can not boot: 1 power indicator light, check the box power is inserted firmly, if no problem, check the fuse and power supply part of the normal connection. 2 If the power indicator is off, verify that the incoming line plug is firmly plugged in and the power cord is in good condition. (2) Infrared does not count: Check whether infrared is firmly connected and whether the infrared head is covered. (3) No alarm: 1 Strong or weak light, check whether there is interference source around, try changing the frequency of the crystal oscillator. 2 Check if the infrared is normal. (4) Long alarm time: Check the length of the alarm and infrared count. (5) String: Check for interference. (6) Liquid crystal gate water phenomenon: Check whether the liquid crystal panel is squeezed, loosen the screws on the liquid crystal panel.
Column Type Load Cell
High-quality manufacturer and supplier of column sensors and accessories in China.
It is made of alloy steel and stainless steel. The elastic body is cylindrical, cylindrical, and cylindrical ring structure. It is used for the measurement of tensile force and compression force. It has a fully sealed structure, a wide range, stable and reliable performance, and easy installation and use. Tension and compression load. It is suitable for all kinds of force measurement and industrial automation measurement control system in the city. For example, truck Scales, hopper scales, railroad scales, testing machines, warehouse measurement, etc.Testing Machine Sensor,Sensor Load Cell,Tank Load Cell,Alloy Steel Load Cell,Column Type Load Cell,Column Load Cell.
Column Type Load Cell,Tank load cell, Sensor load cell, Testing machine sensor, Hopper weighing load cell, Alloy steel load cell, Column load cell.
Ningbo Santwell Imp & Exp Co.,Ltd , https://www.santwell.com