The kitchen is a key area of ​​daily life. Oil and water stains accompany the kitchen. How to decorate a practical kitchen? The frequency of use of the kitchen and the characteristics of easy-to-deface pollution determine that kitchen decoration should be practical and abandoning fancy.
Open kitchen fashion doesn't work
The western kitchens are generally open-planned, and the open kitchens are used in the showrooms of many of the properties. They look fashionable and they feel more spacious. However, the open kitchens are not suitable for Chinese people's eating habits. . It is best for consumers who are used to eating Chinese food and who often cook at home to use open kitchen designs.
First of all, the open kitchen is facing the wall, increasing the decoration budget. Second, the Chinese diet focuses on cooking and produces a lot of fumes. Even a high-powered range hood can hardly avoid soot floating in the living room. It not only causes oil but also corrodes electrical appliances and furniture.
The current home decoration uses a glass sliding door, not only conducive to the kitchen lighting, but also can separate the smoke, there is also a benefit, the track of the hanging sliding door is installed on the top, to solve the door track is easy to filth on the ground Difficult to clean.
Kitchen decoration cabinet is the focus
Cabinets are the focus of the kitchen and are the worktables that must be used for cooking. Whether it is purchasing a whole cabinet or asking a worker to do it, we must measure the size of the sterilizer, range hood, etc.
To make cabinets, first notice the countertops, and the most easily stained is the countertops. There are generally marbles, granites and man-made stones on the market. The hardness of marble and granite is high. The hardness of artificial stone is softer than the former two, but there are many choices for patterns and colors. If artificial stone is selected, care should be taken to protect it. The ash or impurities on the rag can make its face wear out, especially white, oily or dirty water can be wiped clean in time. The base part of the cabinet can be raised up to 10 cm, which is good for waterproofing and dampproofing, or cabinets with baseboards of stainless steel or PVC.
If it is to buy the whole cabinet, we must ask the fitting company and cabinet manufacturers to measure the size, but also to see if the original location of various pipes is appropriate. If it is inappropriate to change, the construction team must carry out necessary reconstruction according to the drawings. It should be noted that due to the fact that the cabinet manufacturers do not have the standard, or the construction team did not strictly follow the dimensions, it is often the case that the cabinet interface is not locked due to inaccurate dimensions.
Kitchen decoration attention decoration details
1, the kitchen needs enough light, light glazed tiles reflect the brightness is more than enough, scrub is also easier.
2. No one will use complicated chandeliers in the kitchen. The difficulty of cleaning is very high. Generally, the designer will recommend the owner to use a ceiling lamp with a cover body.
3, the best choice for cooking basin faucet can switch with the back of the hand, the kind of tap that must use the fingers is not easy to keep clean, there are difficulties when turning the oil on the hand.
4, in the kitchen before the renovation, the size of the refrigerator must be a good quantity, like a good place to place, because the size is not a good amount, had to move the refrigerator position examples are common.
Renovation points Kitchen decoration Renovation notice Range hood Marble decoration design Stainless steel space Open type kitchen Design room decoration Find decoration company Okay living room Renovation model room Renovation model room decoration Living room cupboard door Home cabinet Stainless steel cabinet Stainless steel whole cabinet Glass furniture Marble cabinet Kitchen Cabinet Doors White Furniture Glass Doors Kitchen Glass Sliding Doors
A ball check valve is a check valve in which the closing member, the movable part to block the flow, is a spherical ball. In some ball check Valves, the ball is spring-loaded to help keep it shut. For those designs without a spring, reverse flow is required to move the ball toward the seat and create a seal. The interior surface of the main seats of ball check valves are more or less conically-tapered to guide the ball into the seat and form a positive seal when stopping reverse flow.
Ball check valves are often very small, simple, and cheap. They are commonly used in liquid or gel minipump dispenser spigots, spray devices, some rubber bulbs for pumping air, etc., manual air pumps and some other pumps, and refillable dispensing syringes. Although the balls are most often made of metal, they can be made of other materials, or in some specialized cases out of artificial ruby. High pressure HPLC pumps and similar applications commonly use small inlet and outlet ball check valves with both balls and seats made of artificial ruby, for both hardness and chemical resistance. After prolonged use, such check valves can eventually wear out or the seat can develop a crack, requiring replacement. Therefore, such valves are made to be replaceable, sometimes placed in a small plastic body tightly-fitted inside a metal fitting which can withstand high pressure and which is screwed into the pump head.
There are similar check valves where the disc is not a ball, but some other shape, such as a poppet energized by a spring. Ball check valves should not be confused with Ball Valves, which is a different type of valve in which a ball acts as a controllable rotor to stop or direct flow.
A diaphragm check valve uses a flexing rubber diaphragm positioned to create a normally-closed valve. Pressure on the upstream side must be greater than the pressure on the downstream side by a certain amount, known as the pressure differential, for the check valve to open allowing flow. Once positive pressure stops, the diaphragm automatically flexes back to its original closed position.
A swing check valve or tilting disc check valve is check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although swing check valves can come in various sizes, large check valves are often swing check valves. The flapper valve in a flush-toilet mechanism is an example of this type of valve. Tank pressure holding it closed is overcome by manual lift of the flapper. It then remains open until the tank Drains and the flapper falls due to gravity. Another variation of this mechanism is the clapper valve, used in applications such firefighting and fire life safety systems. A hinged gate only remains open in the inflowing direction. The clapper valve often also has a spring that keeps the gate shut when there is no forward pressure. Another example is the backwater valve (for sanitary drainage system) that protects against flooding caused by return flow of sewage waters. Such risk occurs most often in sanitary drainage systems connected to combined sewerage systems and in rainwater drainage systems. It may be caused by intense rainfall, thaw or flood.
A stop-check valve is a check valve with override control to stop flow regardless of flow direction or pressure. In addition to closing in response to backflow or insufficient forward pressure (normal check-valve behavior), it can also be deliberately shut by an external mechanism, thereby preventing any flow regardless of forward pressure.
A lift-check valve is a check valve in which the disc, sometimes called a lift, can be lifted up off its seat by higher pressure of inlet or upstream fluid to allow flow to the outlet or downstream side. A guide keeps motion of the disc on a vertical line, so the valve can later reseat properly. When the pressure is no longer higher, gravity or higher downstream pressure will cause the disc to lower onto its seat, shutting the valve to stop reverse flow.
An in-line check valve is a check valve similar to the lift check valve. However, this valve generally has a spring that will 'lift' when there is pressure on the upstream side of the valve. The pressure needed on the upstream side of the valve to overcome the spring tension is called the 'cracking pressure'. When the pressure going through the valve goes below the cracking pressure, the spring will close the valve to prevent back-flow in the process.
A duckbill valve is a check valve in which flow proceeds through a soft tube that protrudes into the downstream side. Back-pressure collapses this tube, cutting off flow.
A pneumatic non-return valve.
Multiple check valves can be connected in series. For example, a double check valve is often used as a backflow prevention device to keep potentially contaminated water from siphoning back into municipal water supply lines. There are also double ball check valves in which there are two ball/seat combinations sequentially in the same body to ensure positive leak-tight shutoff when blocking reverse flow; and piston check valves, wafer check valves, and ball-and-cone check valves.
Check Valves, Water Check Valves, Brass Check Valves, Sanitary Check Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valve.com