Know "electric grinder"

Electric grinding machine reciprocating electric polishing grinding machine (also known as grinding machine). Widely used in the mold industry for finishing and surface polishing, is a substitute for similar pneumatic products.

The main outstanding features are as follows: 1. Power supply is provided by the power supply, no air pump is required, and the production cost can be saved for the user because it is plagued by air supply and other factors. 2. Long trip, high efficiency, energy saving and environmental protection. The stroke of the same pneumatic imported product is only 0.3-0.7mm, and the stroke of the product can reach 1mm. Due to the more optimized structure design, the maximum power is only 15W. Light weight, low noise, easy to carry. 3. Economical and practical. The price of this product is only a fraction of that of imported pneumatic products, which greatly reduces the user's cost of use. 4. Adequate accessories, easy maintenance.

A. Main technical parameters Power supply: AC90V-240V/50HZ-60HZ Power: Pmax=15W

The use of electric grinding machine

Motor speed: 9000-12000r/min

Circular Chuck: Ф3 Flat Chuck: δ1MM, δ3MM

B. Electric linear polishing machine ydmj-01A Model: ydmj-01A Power: 18(W)

Scope of application: mold, engraving speed: 15000r/min This product inherits the relevant advantages of pneumatic grinding pen, using a dedicated 12V power supply, the input power is only 5W (Max), is not subject to site constraints, the use of extremely convenient and environmentally friendly ( Zero emissions), eliminating the need for gas source construction. The huge noise generated by the pneumatic grinding pen is completely eliminated. The speed of the product is divided into 4 blocks, I = 9000 rpm, II = 10,000 rpm, III = 12,000 rpm, and OFF. The use of low-voltage power supply is more safe, the maximum grinding wheel diameter Φ3mm, the largest diameter of the diamond emery wheel Φ3mm. The grinding machine uses power as its power source, no need to provide relevant air source, low noise, light weight, speed up to 15000r/min, the main use of the occasion for the mold's exquisite grinding and polishing, arts and crafts factory of the fine carving and polishing of the crafts.

C. Electric engraving grinder ydmj-01b Model: ydmj-01b Input power: 27W No-load rotation speed: 12000 (rpm) Speed ​​change mode: Promise-variable speed polishing wheel Diameter: 5 (mm) Weight: 200 (kg) Applicable scope For fine parts that require fine processing

For polishing, sanding, and correction of fine parts that require fine machining

Multifunctional electronic engraving machine: It is a new type of small engraving machine. It can be used to sculpt grinding and polishing machines on wood, bamboo, plastic, metal, stone, jade, ceramic, glass and other soft and hard materials. Saves time, is more versatile than computer engraving machines, and is easy to carry.