Bathrooms and bathrooms are often the corners of household hygiene. Therefore, the laying of ceramic tiles in these two places must pay attention to the health and environmental protection index. Waiting until the leak, emptying and other problems to remedy is to make up for it. From the stage of choosing tiles, it is necessary to have an in-depth understanding of the different properties of different tiles.
Moen faucet     Yilibao Ceramics
Important Index 1: Tile Water Absorption Rate
The first to pay attention to the water absorption rate is to buy tiles in the bathroom space. In general, high quality tiles have low water absorption, which can dry quickly. If the tile does not indicate the water absorption rate, you can use tea or water droplets on the back of the tile. After a few minutes, inspect the degree of diffusion of the water droplets. The less water absorption, the lower the water absorption and the better the quality. Tiles with high water absorption rate can cause cracks on the surface of ceramic tile and peeling off of the whole wall and floor tiles after thermal expansion and contraction. It is necessary to pay attention to this problem in the bathrooms in northern areas where there are four distinct seasons.
Key Indicator 2: Tile Texture Density
The quality of ceramic tiles for the bathroom space is more stringent. When you purchase tiles, you can observe from the side whether the brick surface is flat or not, and whether the uneven size of the pinhole occurs. At the same time, you can tap the tiles to hear the sound is crisp, the more brittle the sound, indicating that the tile texture density is high, the hardness is better. Such tiles are laid into the bathroom space and are not easily damaged and are easy to maintain and clean.
Important Index 3: Glazing
The current tile will tell consumers whether it is suitable for the bathroom space at the time of sale. When you buy, you can identify the thickness of the glaze layer on the surface of the tile. Consumers can use hard objects to scratch the surface of bricks. If scratches occur, it indicates insufficient glazing. After polishing the thin glaze on the surface of the tile, the brick surface is easily contaminated, difficult to clean, and lacks security. Some unglazed tiles should generally not be placed in a damp, closed environment because the pores in the bricks cannot absorb moisture and cause mold to appear.
Expert guide
Question 1: The bricks and bricks next to the pipe wells in the bathroom are now cracked and the bricks are tilted. Some people say that they did not hang the net during the renovation process. The solution is to knock down the tiles, hang the Internet, and then tile. Is this correct?
Expert: This is a construction problem. Judging from the situation, this must be done by using a keel and cement board around the pipeline well. This construction process can easily cause cracking between bricks and bricks. At present, a good home improvement company will use lightweight bricks to handle the wall of a toilet well and then tile it so that it will not tilt.
Question 2: More than two years of renovation, some of the bathroom's tiles began to bulge. Is this a question of decoration materials or a wall problem?
Experts: After decorating the bathroom, there will be emptying after a period of use. This is related to the owner's use. Because, in the process of repeated bathing, the owner caused some empty drums to enter the steam. After a long time, the tiles bulged. However, the quality of decoration and the quality of the tiles are also important incentives.
Tiles Tiles Tiles Entrance Decoration Space Bathroom Home Improvement Cement Home Decor Bathroom Tiles Bathroom Floor Tiles Toilet Leakage Decoration Home Decoration Home
| For products reference | ||
| No. | Item | Description |
| 1 | Bearing Bar Size | 25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10---100x10mm etc. |
| I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etcUS standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc. | ||
| 2 | Bearing Bar Pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 31, 32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc. |
| US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc. | ||
| 3 | Cross Bar Size and Pitch | Twisted bars 5x5, 6x6, 8x8mm; Round bars Dia.6, 7, 8, 9, 10, 12mm and so on. |
| 38.1, 40, 50, 60, 76, 80, 100, 101.6, 120, 135mm, 2'' & 4'' etc. | ||
| 4 | Material Grade | ASTM A36, A1011, A569, Q235, S275JR, SS400, Mild steel & Low carbon steel, etc. |
| Stainless steel SS304, SS316.s335jr | ||
| 5 | Surface Treatment | Black, self colour, hot dip galvanized, painted, powder coating, electrolytic polishing. |
| 6 | Grating Style | Plain / Smooth, Serrated /teeth, I bar, serrated I bar. |
| 7 | Standard | China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88),UK: BS4592-1987, Australia: AS1657-1985,Germany: DIN24537-1-2006, Japan: JIS. |
| 8 | Panel Size: | 3x20ft,3x24ft,3x30ft,5800x1000, 6000x1000, 6096x1000,6400x1000, as request |
| 9 | Application: | oil refinery,petroleum and chemical Industry, Seaport and airport, power plant, transportation, papermaking, medicine, steel and iron, food, municipality, real estate, manufacturing,metallurgy,railway,boiler,etc |
Steel Grating,Steel Bar Grating,Galvanized Steel Bar Grating,Steel Bar Grating For Bridge
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayigrating.com