(â… ) KCG-38 / 0.6 high temperature gear pump disassembly and cleaning, heating, cooling, starting and stopping should be strictly in accordance with the provisions of the operation, in order to avoid undue losses. (II) Care should be taken to maintain the stability of the population pressure of the booster pump so that it has a stable volumetric efficiency to facilitate the operation of the KCG high temperature gear pump itself and the stability of the downstream spinning quality. (â…¢) The inlet is a negative pressure packing shaft seal pump, the packing should be kept at a pressure higher than the atmospheric pressure. When the back pressure is reduced, the pressure of the stuffing box should be adjusted in time, otherwise the pump will be sucked into the air and the belt will be broken. This will affect the pelletizing and cause the discharge of the pelletizer. (IV) To regularly check the temperature of the heat medium jacket, the main body and front and back cover of the heat medium temperature to be consistent. (V) Every time the output increases, the current output, speed, outlet, inlet pressure and current values ​​should be recorded and compared before and after the data, careful analysis, in order to early detection of abnormal KCG-38 / 0.6 high temperature gear pump Situation, in a timely manner.
Welded wire mesh is made of selected quality iron wires through high-precision processing. The end product is level and flat, sturdy structure, and even strength throughout, which is widely used in industry, farming, construction, transportation and mining for protection of structure, safety segregation, keeping of poultry and livestock, and decorations etc.
Varieties available: Galvanized ( hot-dipped & electro ) and PVC coated
Welded Mesh Sheet,Welded Mesh Panel,Ribbed Welded Mesh Panel,Reinforcing Welded Mesh Sheet,Galvanized Welded Mesh Panel
Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com