The machinery industry is a mixed bag, and there are countless manufacturers of large and small. Customers want to buy a satisfactory cone crusher is even more difficult, and the cone crusher has many models and complicated parameters. How to choose a cone crusher to find the right product for you? The machinery industry is mixed, big and small. There are countless small manufacturers. Customers want to buy a satisfactory cone crusher is even more difficult, and the cone crusher has a wide range of models, complex parameters, how to buy a cone crusher, find the right product for you? The principle of selection pays attention to The size of the material and the size of the discharge grain are determined. The feeding degree is large, the product size is coarse, and the coarse or coarse type is selected, and the medium and fine type are used instead. In calculating the feed size, the maximum feed opening size is multiplied by 0.85 as the size basis for the selected feed, and the average size of the product is the maximum feed divided by the crush ratio.
When selecting a liner, the user must generally consider three factors: production, power consumption, wear resistance of the liner; generally should be carried out according to the following principles: maximum feed size; particle size change, feed particle size distribution; Hardness; wear resistance of materials. The longer the lining, the higher the power consumption, the short material for the hard material, the long lining for the soft material, the short material lining for the fine material, and the long lining for the coarse material. In the distribution of the feed particle size, generally, the material smaller than the discharge port of the closed side cannot exceed 10%, and if it exceeds 10%, the power consumption increases, and the product granularity becomes a sheet. The increase in the moisture content of the viscous material can affect the throughput of the material, and generally does not exceed 5% in terms of the moisture content of the material. In the use of power: standard cone crusher should reach 75% ~ 80%, short cone cone crusher should reach 80% ~ 85%. Because of its harsh environment and large dust, the cone crusher often has some maintenance problems. It often has various problems in operation. Generally speaking, the cone crusher should pay attention to the following problems during operation. The machine is working properly. In the cone crusher, the feeding should be uniform and not segregated. If the feeding is uneven, the production capacity will decrease, the product size will be too large, the spring action will be frequent, the bowl bearing pressure will be large, and the power consumption will increase. There must be a de-ironing device to prevent the crushing chamber from passing through the iron. If the iron is frequently over-exposed, it may cause a shaft breakage accident. For more information about the crusher, please contact 15021020694, visit the crusher manufacturer **http://://news.chinawj.com.cn
W960/W1130
Width : 960/1130mm
Efficient width : 901/1080mm
Thickness : 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Length : customized
Aplication : roof, celiling, wall panel, etc.
Wall Panel,Corrugated Roof Panels,Corrugated Plastic Panels,Corrugated Plastic Roofing
FOSHAN CHANCHENG XINGFA TILE INDUSTRY CO., LTD. , https://www.upvcsheetsupplier.com