Precautions before using seat belts

1. Each time you use the seat belt, you should check the signs and certificates, check whether the nylon is cracked, the seam is firm, the metal parts are missing, cracked and rusted. The safety rope should be hung on the connecting ring.

2. Seat belts should be used high and low, and should prevent swings and collisions, avoid sharp objects, and avoid contact with open flames.

3. The hooks and loops of the seat belt should be hung on the mooring point firmly during the operation.

4. When using a seat belt in a low-temperature environment, care should be taken to prevent the seat belt from becoming hard to break.

5, the use of frequent safety ropes should always do a visual inspection, the occurrence of abnormalities should be promptly replaced with new ropes, and pay attention to the problem of adding rope sets.

6, can not be used to tie the seat belt, so as to avoid the impact of the safety rope from the knot at the disconnection, the safety hook should be hung on the connecting ring, can not be directly linked to the safety rope, so as to avoid falling safety rope was cut off.

7. Two years after the use of the seat belt, sampling inspection should be conducted according to the volume purchase situation. The surrounding rods shall be subjected to the static load test and the safety rope shall be subjected to the impact test. If no breakage can continue, the unqualified product will not be used again. The rope must be replaced with a safety rope before use. When replacing a new rope, pay attention to the sleeve.

8, seat belts should be stored in a dry, ventilated warehouse, are not allowed to touch the high temperature, open flame, strong acid, alkali and sharp hard objects, and do not exposure. Do not use tools with hooks during transportation, and avoid sun and rain during transportation.

9, seat belts should always be cleaned, can be placed in warm water, rub gently with soap and water, and then rinse with clean water, and then dry.

10. The various components on the seat belt must not be arbitrarily removed. When replacing new parts, select qualified parts.

11. The seatbelt use period is 3-5 years. Abnormalities should be scrapped in advance. During the use process, attention should be paid to the inspection. A trial should be conducted within six months to one year. If the main part is not damaged, it will be timely reflected if it is found to be damaged or deteriorated, and it will be stopped to ensure the safety of operation.

This article is a reprint of the online media and represents only the author's point of view. It has nothing to do with the China Labor Insurance Network. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.