Due to the rapid development of the packaging market, the demand for the assembly line is also getting higher and higher. The assembly line is far away, the performance is high, and some simple operations can be completed when the conveyor is delivered. Therefore, more and more enterprises are used. It can complete the complicated and collectible packaging of water that cannot be completed by a single device.
How to maintain the conveying equipment such as assembly lines and conveyor lines
Due to the rapid development of the packaging market, the demand for the assembly line is also getting higher and higher. The assembly line is far away, the performance is high, and some simple operations can be completed when the conveyor is delivered. Therefore, more and more enterprises are used. It can complete the complicated and collectible packaging of water that cannot be completed by a single device.
Today's assembly line shows you professional industry knowledge and concepts, as well as the operation methods of conveyors, conveyor lines and other conveying equipment, to give you accurate maintenance and use of these equipment.
First of all, let's start with the characteristics of the assembly line:
1. The speed is correct and stable during the conveying process, which can ensure accurate synchronous conveying;
2, made of a specific aluminum profile, it is very convenient to assemble.
3, the structure is simple, the appearance is exquisite, practical and no noise;
4. The amount of transportation is large, and it can load a large weight;
5, high automation, multi-function,
6. Convenient for stacking and transportation, can be used as assembly development line or used for storage and transportation of articles;
7. The equipment has guaranteed performance and can adapt to any harsh places (high temperature, dust) work.
8. The chain conveyor is to use the chain plate as the traction and load body to transport things, the chain can be the ordinary sleeve roller conveyor chain, and some other special chains can be used; the assembly line roller
How do we go for maintenance and standard operation of each component of the assembly line?
The conveying equipment such as the assembly line is not only maintenance, but the workers operate at the time of operation. Only in this way can the conveyor line run normally.
It should also be noted that maintenance is not only the maintenance of the hardware, but also the regular operation of the operator. The graphic design of the assembly line should ensure that the transportation route of the parts is the shortest, the production workers are easy to operate, the auxiliary service department is convenient to work, the production area is most effectively utilized, and the interconnection between the installations of the assembly lines is considered. In order to meet these requirements, the form of the pipeline and the arrangement method of the installation line of the pipeline should be considered in the layout of the pipeline.
1. Maintenance and maintenance of the transformer of the head motor: Do not enter the water in the motor. Once the water enters, there will be a chance that the insulation of the motor will be destroyed and the equipment will not run.
2. Maintenance and maintenance of the chain: The chain needs to be observed more, and the butter and lubricating oil are added frequently. Due to the long-term operation of the chain, the lubricating liquid will evaporate, causing the noise to become larger and tend to crawl.
3. Maintenance and maintenance of the gearbox at the head of the assembly line: After using the first-quarter appearance for the first time, the excess oil in the gearbox is completely discharged, and then the gasoline and diesel are used to take a bath inside the gearbox, and then the new one. The lubricating oil is added to the middle of the observation window. This will be done every once in a year. (We need to note that too little oil will cause the gearbox to be noisy and overheated, even the deceleration of the gearbox, and each time the lubricant can't exceed the middle of the viewing window. If it exceeds too much, the gearbox will overheat. The motor load is too large and the protection switch is open.
Http://news.chinawj.com.cn Submission:
Real Estate Architectural Model
Real Estate Architectural Model,Construction Scale Models,Builder Miniature City Models,Real Estate House Scale Model
Nanjing Great Century Art Model Co., Ltd. , , https://www.dsjysmx.com