The newly cast silicone roller should not be put into use immediately. Since the internal structure of the newly cast silicone roller is not stable enough, it can be easily reduced if it is put into use immediately.
Correct use and maintenance of silicone roller
Established in 2001, Dongguan Haichang Hardware & Rubber Co., Ltd. is a professional manufacturer of various industrial rubber rollers and printing machinery rubber rollers. Over the years, relying on strong technical force, advanced machinery and equipment "target=_blank> mechanical equipment, scientific management mode and pragmatic spirit of refinement, with integrity and quality as the purpose, the market share continues to expand, praised by the majority of users .
First, the correct use and maintenance of the silicone roller. The correct use and maintenance of the silicone roller: the newly cast silicone roller should not be put into use immediately, because the internal structure of the newly cast silicone roller is not stable enough, if it is put into use immediately, Easy to reduce the service life.
Therefore, the new silicone roller that has just been released should be placed for a period of time, so that the rubber roller is kept in a relatively stable state after being exposed to the ambient temperature and humidity, which can increase the toughness of the colloid and thereby improve the durability. The correct storage of the idle silicone roller.
After the silicone roller to be used should be cleaned, the plastic film is used to seal the gel and placed on the rubber roller frame. Do not stack a few pieces or place it on the wall to avoid the gel being unacceptable. loss. During the transportation process of the used rubber roller to the processing and casting, it is forbidden to throw the chaotic pressure or heavy pressure, keep the roller core unbiased and not bent, to ensure the normal use of the roller core.
Silicone roller heads and bearings should be well lubricated. We know that the accuracy of the silicone roller shaft head and bearing directly affects the effect of ink transfer and ink discharge. If the poor lubrication causes the silicone roller shaft head, the wear and clearance of the bearing will inevitably lead to the disadvantage of uneven printing ink color. At the same time, it will also cause printing bar marks due to bad conditions such as jumping rubber and slip rubber. Therefore, the silicone roller shaft head and the bearing should be filled with lubricating oil to prevent the normal use of the silicone roller and the printing quality.
Second, the reasons for choosing Haichang:
The rubber roller produced by our company has excellent formula, superior materials and advanced technology. The products include: ink roller, water roller, alcohol water roller, ink roller, polishing roller, oil roller, paper roller, laminating roller, film blowing roller, gravure roller (copper roller), offset roller, paper roller, Printing and dyeing roller, circuit board acid-resistant roller, circuit board high temperature roller, shoe composite roller, hardware, wood machinery and other rubber rollers, its performance: corrosion resistance, acid resistance, alkali resistance, wear resistance, oil resistance. It is resistant to tearing, high temperature, water, anti-static, anti-fouling, elastic and long-lasting. Can be well satisfied with paper color printing, carton printing, plastic bag printing and printing and so on.
The company has always been "customer first, quality first" as its purpose, "professional to do better, service and thoughtful" as the company's quality policy, "reputation-based, service sincerity" as the operating policy. With this, we will continue to improve and make unremitting efforts. Adhering to quality, advanced equipment, professionally designed and timely service is our commitment to every customer.
Information Sources:
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Dimming glass is an active switchable glass technology meaning it needs electricity to control. Smart tint glass systems utilize electrochromics, which is the science of darkening a material using electricity. Peeling Smart Blind Film may need to be replaced. Sometimes you can fix Magic Film by rinsing it in soap and water and then using a squeegee to place Projection Film back in place, making sure to smooth out any bubbles first. However, it is generally better to mark a square around the damaged area and cut it away with a razor blade. Applications of dimming projection are not limited to the home, but are especially useful in offices and public places. For office use, the glass partition instant projection screen is used for conference presentation. Public places such as shops, shopping malls or airports are used as advertising displays, dimmer projection is more attractive. Shopping malls can turn the monotonous glass window into a large area of transparent holographic projection film, in high - clarity advertising at the same time, will not hinder consumers through the window to watch exhibits and in-store scenery, the magic display effect greatly attract passing consumers, so as to achieve a better publicity effect.
Home Decoration Smart Glass,Privacy Laminated Glass,Smart Laminated Glass,PDLC Laminated Glass,Switchable Laminated Glass,Privacy Tint Glass
Tianqixun Technology , https://www.tqxdisplay.com