Wrapping, filling and sealing are the main processes of packaging. Of course, disassembly, cleaning, stacking, metering, etc. are also within the scope of packaging. The use of mechanical packaging not only improves product productivity, but also reduces labor intensity and meets hygiene requirements. There are various types of packaging machines, which can be divided into outer packaging machines and inner packaging machines according to their functions. According to the functions, they can be divided into multi-functional packaging machines and single-function packaging machines; according to automation, they can be divided into automatic packaging machines and semi-automatic packaging machines.
So what problems will you encounter in the process of using the packaging machine? China Lifting Network explains for you.
First, the electromagnet does not pick up. This problem can be caused by various reasons such as malfunction inside the machine, burning of the solenoid coil, and interruption of the line. First check whether it is internal or external. Check the solenoid fuse, check if the solenoid is energized, and check the internal power after everything is normal. Remove the host and apply a clear signal through the internal short circuit to determine whether the fault has come to the machine or the switch.
Second, the use of packaging machine work in the film material is easy to deviate from making it unable to feed properly, the cause of this failure is the offset of the angle of the upper triangular plate, this fault can be solved by adjusting the angle of the upper triangular plate, adjust clockwise The offset of the upper film can be corrected, and the offset of the underlying film can be corrected counterclockwise.
When three or more bottles are packaged, the electric eye cannot detect the package, and the packaging machine can easily cut into the package. The gap between the bottles affects the detection of the electric eye, which is the main cause of the above problems. Adjusting the angle of the horizontal electric eye detection to an oblique angle can reduce the probability of the electric eye detecting the gap of the package and avoid the situation that the packaging machine is chaotically cut during normal operation.
4. The shrinking machine heats up slowly or cannot rise to a higher temperature. The cause of this problem is damage to the heater or short circuit. Check the meter to see if the phase is the same as the ohmic value of the machine. If it is normal, it is a short circuit. If the line or the electric heating tube still finds an abnormality when the phases are turned on, the heater needs to be replaced.
The above four points are the major failures and minor problems that the packaging machine often encounters. Only when these faults are handled, the packaging machine can perform better.
Hitachi Pump Device,Hitachi Hydraulic Pump,Hitachi Main Valve Assy,Hitachi Control Valve
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.huaxinbrush.com