Bathtub installation detailed Raiders three steps two notes easily get

The installation of the bathtub is usually a big problem in the bathroom decoration. Because the bathtub is a large part of the bathroom, a little carelessness will bring a lot of trouble to the later stage, so we must pay special attention to the installation method of the bathtub. In addition to paying special attention to waterproofing, there are more details on the installation of the bathtub. Today we are going to take a look at the installation method of the relevant bathtub.

1. Frame description: Dig a hole of 150mmx305mm at 340mm on the ground for drainage positioning.

2. Accessories installation: Install the overflow pipe section and the drain pipe section according to the manufacturer's instructions.

Note: Users can install horizontal drainage or vertical drainage as needed. After swinging the drain tee 90 degrees in the direction of the arrow, it can be horizontally drained by turning it 180 degrees in the plane.

3. Installation instructions: Put the bathtub in the groove, check whether the horizontal, front, rear and left and right positions are suitable, and check whether the ground drainage hole is appropriate. The bottom of the bathtub should be close to the smooth tiled floor to hold the bathtub just right.

Note: The brick wall support should be stable. When installing the bathtub, the bottom of the bathtub should be solid with the fine sand, and the bottom of the bathtub should not be supported by the brick to avoid damage to the glaze during use.

Check whether the level, front, back, and left and right positions are appropriate, check whether the drainage facilities are suitable, and install them stably. Take measures to prevent dirt, bumps, and clogging of the bathtub and the launching facilities during the installation process. Do not use sparks for angle grinders and spot welders. Splash on the bathtub, otherwise it will cause damage to the glaze and affect the appearance of the bathtub.

Tool Kit Oem

Newstar Hardware is a China Tool Kit maker supplier and manufacturer, offer large range of tool kit OEM and Tool Set kit. Household tool kit, Hand Tool kit, Tool Set Box, tool kit trolley and also tools in bags, including Hand Tools, power tools and Garden Tools. High quality, low price and efficient delivery time. We are professional in tool set kit production and OEM services.

Tool Kit Oem,Tool Kit Maker,Oem Tool Kit,Household Tools

SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.sjnewstarhardware.com