Diatom mud wall surface daily cleaning and maintenance method

How to clean the diatom mud wall after it is dirty? The diatom mud wall is dirty. It is necessary to take out the most effective cleaning measures according to different situations. The following Best Wall art will introduce to you.

1, small handprints, footprints or handwriting, etc., because children like to play, it is inevitable to leave some fingerprints on the wall, you can try the following methods to clean:

A: Use a simple tool such as soft rubber, hard rubber or fine sandpaper to gently wipe the dirty diatom mud wall surface, and slowly remove it without leaving any traces.

2, hanging dust, ash cleaning method Wall hanging dust is generally caused by excessive drying of the air, floating dust carrying electrostatic adsorption. Because diatom mud has a good balance of air humidity, the surface of the wall material is hydrophilic, which can effectively reduce the static phenomenon. Therefore, compared with other material finishes, the diatom mud wall is less likely to be dusty. Self-cleaning function.

A: It is an effective method to use a bristles or a light wipe with a clean rag.

B: Use a vacuum cleaner to vacuum.

3, coffee, orange juice and other colored liquid

A: It should be wiped in time before the stain penetrates and spreads. Shallow stains can be removed by gently rubbing the dirty diatom mud wall with a clean rag with chlorine bleach.

B: If it has penetrated and spread and the stain is large, it needs to be partially brushed with water base oil after it is completely dried, and then covered with the same color diatom mud which is matched with diatom mud. It can also be understood as dirty and heavy. The agency reported a piece of compensation.

C: If necessary, it can be partially moistened with water, removed, and re-patched. This process requires a professional master to complete.
Due to the characteristics of diatom mud, unlike ordinary paint, it can be washed with a large amount of water and water, so consumers should pay attention to the protection of the diatom mud wall.

Global hardware network

Concerned about surprises

Label: Diatom mud wall surface daily cleaning and maintenance methods

Previous: Do a good job in cleaning and maintaining the color of the paint. Next post: How to do the sink leak is the hub

Knurled Nut

Brass knurled insert Made of brass material, good thermal conductivity and heat resistance.

Widely Used On the Molding for Tightly Fixing.

Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection

China Knurled Nut,Knurled Brass Insert Nut,Copper Knurled Insert Nut,Brass Knurled Insert Nut, we offered that you can trust. Welcome to do business with us.

Brass Knurled Nut,knurled thumb nut,knurled brass nut,Copper Knurled Nut,insert knurled nut

Shenzhen Lanejoy Technology Co.,LTD , https://www.wirefruitbasket.com