Bearing Housing Installation Standard snap ring and mounting plate mounting bearing housing several ways. Mounting screws with locating screws will cause deformation of the bearing jacket, should be avoided. Flange-type installation of flange-type linear bearings, with the bearing housing bore surface accuracy to be precise. Adjustable (small open type) bearings are perpendicular to the openings in the bearing housing for uniform preload in the circumferential direction. Large opening type If used in conjunction with a suitable bearing housing, the large opening bearings can also be adjusted for clearance and even lighter loads. When installing the linear bearing into the bearing seat should be used to assist work to avoid direct percussion end face or ring should be evenly imported bearings, with the buffer plate, with a light tapping into the optical axis wear Into a linear bearing, shaft and bearing centerline must be in line. If the shaft is inserted obliquely, the balls may come off, or the cage may be deformed, causing damage to the linear bearings. The applied load should be equally distributed throughout the bearing, especially when subjected to momentary loads. Two or more bearings should be used. Linear bearings do not withstand rotational loads, which can lead to accidents.
Dies And Hand Tools,Grommet Kit,Grommet Punch,Eyelet Punch Tool
NINGBO ZONGLAN MECHANICAL AND ELECTRICAL EQUIPMENT MANUFACTURE CO., LTD , https://www.zonglaneyelet.com