How to accept the home decoration: home decoration acceptance is very important, the quality of the acceptance directly determines the quality of the decoration of the house
Acceptance of paint
1) Is the surface of the furniture contaminated oil saturated? It should be ensured that there is no foaming, no cracks, and the thickness of the paint should be uniform and consistent in color.
2) The surface of the furniture varnish should have the same thickness, the paint surface is saturated, and there is no particle clean.
3) Wall latex paint should be smooth and reflective. No emptying, blistering, cracking.
4) The paints for wood and plasterboard ceilings are generally latex paints and should have a smooth surface with no cracks at the board joints.
5) The connection of the ceiling corner line is smooth and there is no obvious misalignment and deformation.
6) The seams of the wallpaper are accurate without tearing. Patterned textures are accurate and there is no dislocation.
7) There is no pollution on the wall and no stain exists.
Mason acceptance
1) The brick surface is flat and there is no inclination.
2) The brick surface is uniform and regular.
3) Toilets, balconies and kitchen floor tiles with floor drains have sufficient self-drainage inclination.
4) The brick surface is not broken and collapsed.
5) Patterned tiles are oriented in the correct direction and there is no reversal.
6) Tiles and waistlines are in the correct position without any misalignment or height error.
Carpentry acceptance.
The acceptance of woodworking is mainly reflected in:
1) Is the construction straight? Whether horizontal or vertical, proper carpentry practices should be straight.
2) The accuracy of the rotation angle. The normal corners are all 90 degrees, except for design factors.
3) Is the spelling precise and accurate? The correct wooden pattern is to make sure that there is no gap or a uniform separation distance.
4) Are the arcs and roundness smooth? In addition to the individual to ensure that it looks smooth, a number of the same shape should also ensure the consistency of the model.
5) Is the cabinet door switch normal? When the cabinet door is open, it should be light and no noise.
6) There should be no gap in the wall of the fixed cabinet.
7) Whether there is a broken situation in the woodworking project? The surface of the woodworking project should be flat and there should be no drumming or breaking.
8) Is the symmetrical carpentry project symmetrical?
9) Whether the decorative panels of the woodworking project have been repaired with nails? Of course, this is the job of the painter. However, because it exists in the woodworking project, it is mentioned here.
10) The connection of the ceiling corner line is smooth and there is no obvious difference between the pattern and
11) The installation of the foot line is straight and accurate from the ground.
12) There is no deformation in the ceiling of toilets and kitchens such as aluminum buckle boards and PVC buckle boards.
13) The door handle lock is installed in the correct position and is normally open.
14) When the bedroom and other space doors are opened normally, when the door is closed, the upper and lower door seams are tight and the lower door gap is moderate. Generally 0.5cm is preferred.
Hidden project acceptance.
On the premise that the project is carried out, pre-acceptance should be carried out on completed concealed projects such as hydropower projects. This is because these items are basically invisible when they are completed. So it must be checked before it is closed.
The acceptance concealment project is mainly divided into three parts:
1. Is the water supply to the pipeline clear? Observe the presence of water droplets or leakage in the joint elbow position. The acceptance of the water pipe must have a 24-hour pressurization test after completion.
2. Is the lighting and sockets normal? Buy an ordinary incandescent lamp with a seat for testing. Observe that all wires are sleeved.
3. Is the TV signal clear? Are there any snowflakes and interference? The best way is to take a small TV and test it. Of course, if you do not change the location of the TV outlet, this step is generally exempt.
4. Is the telephone signal normal? Is there any noise? This can be tested by telephone.
5. Is the network line normal? In addition to using a notebook computer with a modem, there is a tens of yuan dedicated tester on the market that can test whether the signal is unblocked without dialing.
6. Check whether the signal cables such as TV telephones are in close proximity to the wires. Normally, it is required to maintain the angle (non-parallel) or maintain a distance of more than 20cm.
7, the ground waterproof. The water proofing of the ground needs to be closed. The method is to close the drainage floor drain with plastic bags, etc. At the same time, a small pier is built on the side of the floor drain and at the entrance to prevent water leakage. Then put about 1cm of water, after 24 hours, see if there is leakage of water downstairs. It should be noted that the premise of this test is that you have already done water proofing and you will test it before putting it on.
Metalworking acceptance
1) The structure of the metal body is straight. If it is a window part, it is required to complete the closure such as a strip of rubber.
2) The metal form operates flexibly without hindrance.
3) The welded joints of security nets, such as security nets, have been polished and are firmly in place with no looseness.
4) Specifications and wall thickness meet the required thickness.
5) Is there any leakage of rain between the window and the window?
Miscellaneous acceptance
1) In accordance with the provisions of the contractual project, it is checked item by item whether all projects have been completed.
2) Are all the lights on?
3) Check whether the project waste has been completely cleared?
4) Are sanitary fixtures and other installations installed correctly, are the toilets including water storage and flushing normal, and are the sinks draining properly?
5) Does the floor drain block?
Three Tree Paint TV Paint Window TV Decoration Latex Paint Home Improvement Floor Tile Door Kitchen Cabinet Door Bedroom Lighting Tile Tile Tile Specification Kitchen Tile Balcony Tile Bedroom Bedroom Lamp
Axial Flow Fan Louver Damper,Air Door Structure with Sealing Components,Butterfly Valve for Axial Flow Fan
Yuncheng Anhong Enery-saving Explosion-proof Fan Co.,Ltd. , https://www.anhongfengji.com