The bathroom glass partition is the first type of partitioning method currently used in the bathroom. Its main function is to distinguish the space area and make better use of space. The main reason is that the bathroom glass partition is well dismantled, installed fast, and can be reused repeatedly. The advantages are deeply loved by consumers. Next Xiaobian introduced bathroom glass partitions and bathroom glass partitions for everyone.
Bathroom glass partition practice
1. When doing the bathroom glass partition, first lay out the floor tiles and the wall tiles, and then use the specified size to make the partition, but it should be noted that the upper and lower walls may be inaccurate according to the actual size of the glass partition. Well installed and used.
2. When laying tiles, first install the sewer pipe and then install the floor drain. Then install the door frame when installing the partition, the door frame can be used to stop the water, if there is no door frame to install the threshold stone, the threshold stone should be higher than the ground 1.5-2 cm, otherwise the shower water can not reach the wet and dry partition from the door outflow The purpose is now.
3. When installing the bathroom glass partition, it is best not to use the slide rail, because the area of ​​water and dust in the slide rail is very difficult to clean. After a long time, it will stink and affect the indoor air.
4, in the bathroom glass partition must pay attention to, do not choose the glass material jade sand, because the jade sand glass will become transparent after water, very inconvenient.
5, after the bathroom glass partition is done, should pay attention when using, in order to extend the service life, after the bath, use a dry cloth to wipe it clean, do not leave a little water stains, if there is water, then You can use white vinegar to gently spray on the surface of the glass, after a period of time can be wiped with a cloth.
Bathroom glass partition buy
1, to see the material: the general material is easy to change color, surface treatment is also relatively poor, high-quality materials look good.
2. Look at roller skating: Good roller skating. The material or wheel seat is tight and the wheels are not easy to get into the water. The skating and guide rails have a tight fit and a small gap. They will not come off when they are hit.
3, bathroom glass partition is the best color can be the same as the style of the bathroom, some consumers like the appearance of a patterned partition door, this decorative effect is good, gives the enjoyment of the United States; but there are some more traditional people, choose opaque Cloth partition so that others can use the bathroom while bathing.
Editor's summary: About the bathroom glass partition practice and bathroom glass partition purchase is introduced here, I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.
Bathroom glass partition bathroom glass partition wall bathroom glass partition practice
PP pipe and fitting is made by material polypropylene, it can be used for both water system and industrial application, PP Pipe Fitting has good mechanical properties, good chemical properties, good heat resistance, good electrical insulation, non-toxic.
Ningbo RMI Plastic Co.,Ltd produce PP pipe fitting, PP-H pipe fitting and PP-GF pipe fittings according to standard DIN 8077/8078, pressure rate PN10, SDR11 and PN6, SDR17.6 size from 20mm to 500mm.
PP pipe and fitting includes: PP coupling, PP elbow, PP tee, PP flange, PP reducer, PP end cap, PP union, it is suitable for water supply, water treatment, chemical industrial, steel factory acid pickling system, chlor alkali industry, pharmaceutical industry, etc.
PP Pipe Fitting
PP Pipe Fitting,PPH Pipe,PPH Pipe Fitting
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com