This is a new product of Kyocera Corporation of Japan, which is suitable for the intermittent processing of automotive parts such as automobile gears and various high hardness materials.
main feature:
The 1 blade is made of ultra-fine grain (0.5-1.0μm) CBN material, and the chipping resistance is greatly improved;
2 The special nitride ceramic bonding phase is used at the tip end of the CBN blade to greatly improve the wear resistance and extend the tool life by 2 to 3 times;
3 It can carry out high-speed interrupted cutting of large feedstock for high hardness materials, and the processing reliability is very high;
4 In addition to the standard blade, there is also a CBN blade tip miniaturized blade that is both practical and saves tool costs.
main feature:
The 1 blade is made of ultra-fine grain (0.5-1.0μm) CBN material, and the chipping resistance is greatly improved;
2 The special nitride ceramic bonding phase is used at the tip end of the CBN blade to greatly improve the wear resistance and extend the tool life by 2 to 3 times;
3 It can carry out high-speed interrupted cutting of large feedstock for high hardness materials, and the processing reliability is very high;
4 In addition to the standard blade, there is also a CBN blade tip miniaturized blade that is both practical and saves tool costs.
Nantong Romax Hardware Co.,Ltd. , https://www.hardwarehouse.cn