In the end face drilling of the disc type workpiece, only the combination jig components are used, and sometimes the production needs cannot be met. Therefore, based on the combination of components, we have designed a group of fixtures that can drill 3 equal holes. The drill sleeve 4 (Fig. 1) can be moved in the groove of the drill template 1 to accommodate changes in the drilling position. The distance from the centerline of the drill sleeve 4 to the centerline of the drill template 1φ18mm hole is adjusted by the pad 5, and the pad 5 can be of various specifications as needed. Use the mandrel and drill template when the workpiece has a reference hole
Automobile Exterior Mold,Automobile Interior Mould,Plastic Automobile Interior Parts Molds,Car Interior Parts Plastic Injection Mold
Taizhou ANO MOULD CO.,LTD , https://www.ainomould.com