The construction steps of the paint project, the owners who are about to begin renovation, must not be missed.
1, paint must use high-quality paint. During construction, clean the site and minimize human activities and dust processes.
2, check the cleaning of the grass-roots level, can be used to gently polish the surface burr 400# sandpaper, clean with a clean towel, check whether the surface of the panel stains, damage can be used.
3, all panels and lines should be done after the transparent putty and primer again. After the substrate is cleaned, a transparent putty can be applied. According to the type of the panel, brushing or direct squeegeeing can be applied. The transparent putty can be applied twice. After being coated for 4 hours, it can be ground and polished. The putty should be thin and uniform.
Primer
4, putty polished, transparent primer, transparent primer and special clear transparent bottom and curing agent, thinner ratio of 1:0.3:0.8 to 1. The transparent primer should be brushed or sprayed with 200# filter before use and brushed twice. After 4 hours of drying, polish with 400# sandpaper.
Protect furniture
5, before painting, should be finished product protection, the door hinges, locks, door edges and other vulnerable parts of the paper tape carefully paste. It is forbidden to stack other items on the paint veneer. The floorboards of the finished product are protected by paint articles to prevent the paint from dripping onto the finished floor.
6. During the construction, the proportion of the paint, curing agent and diluent shall be detailed with the paint construction instructions. After the paint is mixed, filter it with 200# or more filters and let it stand for 15 minutes before use. Brushing should be thin and uniform, no flow, pinholes, and missing brush parts.
7, to fill the nail eye, transferred at least 4 color putty after the model color test. Paint over the top 1 times. Use after determining the effect is good. (50cm away should not be visible nails), when filling the nail hole, pay attention to check the woodwork process defect part and handle it.
8. When spraying process is used, the site should be cleaned. The ground should be sprayed with a small amount of dust and sprayed evenly.
Wall construction three trees paint paint furniture
LED Magnetic Track Light System
What is magnetic track light?
With the rise of minimalism in the design world, the design trend of mainless lighting is coming, and the LED Magnetic Track Light System has become a key element of interior lighting design. The Magnetic Track Light is a 48v safe voltage, which is harmless to the human body under normal circumstances. And it is very flexible and can be adjusted freely. Magnetic Light can adjust the type of lamps and the number of lamps required at any time according to needs, and it is very flexible to use.
Magnetic Track Light can pre-install tracks directly on the top surface, install magnetic lamps, and realize the design of no main lamp without ceiling. When overhauling, disassembling and repairing, you only need to disconnect the power supply and remove the lamp from the magnetic track. It is also very convenient to redesign and replace it later.
There are many types and rich light effects. The design of the magnetic light adopts a modular concept. After the track is preset, the style of the light source can be freely selected. There are many types that can be selected, such as downlight, Magnetic Track Spotlight, Grille Track Light, Magnetic Track Linear Lights, pandent light can be selected, and can also be used in a variety of styles. The style of the lamps determines the effect of the light source, which is suitable for a variety of different scene requirements.
Track Lighting Systems,Track Lighting Replacement,Track Lighting in Living Room,Track Lighting Kitchen Ideas,Track Lighting Ideas
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com