As the New Year approached, many owners who requested to stay in the year before the renovation were completed immediately. It is recommended that the owners strive for acceptance as soon as possible. Problems should be discovered early and resolved early to prevent major repairs after check-in. So, what's the key to completion acceptance? And listen to experts.
Fuqing plate    Yellow sand cement (by Austria)
Acceptance of Maintenance Benefits in Order
It is advisable to follow the order in the inspection and acceptance. The emphasis is on the acceptance of the "face" project and the "Lizi" addition and subtraction in the decoration. Experts suggest that the decoration company's supervisor should do the pre-inspection first, and then the owner in accordance with the provisions of the contract project, one by one to review whether the project is completed, and then in accordance with the order of the contractual budget acceptance, so as to avoid errors and omissions.
After the completion of the acceptance, the decoration company will settle the final amount of the project. In order to avoid the miscalculation of the added item, the owner also needs to measure and verify the addition and subtraction items that appear during the renovation process and take this final step. After acceptance, the owner must sign a good warranty agreement with the decoration company to safeguard their own rights and interests.
Hydropower acceptance is still the focus
Although during the mid-acceptance of the renovation project, the waterway has been subjected to pressure test and water-rejection test, and the circuit installation has also undergone acceptance of the concealed works, but the hydropower project also involves the installation of waterway accessories, electrical accessories, lamps, and electrical products. The problem is still one of the focuses of the completion acceptance of the renovation project.
Circuit installation acceptance is mainly through lighting test, switch test control to see if the lighting, power is normal, the owner can also use electrician professional test pencil to test each socket to see if power.
Waterway installation acceptance is mainly to check whether the pipeline is firm, you can open the faucet to check whether it will jitter; also need to see whether the water supply pipe is smooth, there is no leakage phenomenon, mainly to see whether the joints and elbows have water droplets or appear Leakage, you can use paper towels to wipe the joints, elbow detection. In addition, it is necessary to check whether there is a phenomenon of "flooding" and "backslope" in the room with floor drain. You can turn on the faucet or shower, and after a period of time, see whether the flowing water is smooth and whether there is local water accumulation. In addition to this, it is also necessary to check whether the floor drain, the toilet and the wash basin are clean.
Acceptance of wall and floor tiles: both inside and outside
Accept the wall tiles and floor tiles first to see whether the brick surface is flat, whether the brick surface gap is regular and consistent, and whether the brick surface is broken or collapsed. Also pay attention to whether the tile and waistline are in the correct position and there is no misalignment or height error.
In addition to external considerations, wall tiles and floor tiles are also specially tested for their internal hollowing rate. The owner can use a metal hammer to gently tap the four corners and the middle of the wall and floor tiles to see if there is a hollow sound. The partial emptying rate of walls and floor tiles cannot exceed 5% of the total paved area, otherwise shedding problems will occur.
Woodworking acceptance: flexible and easy to use
For the wood door produced on site, whether the opening direction of the acceptance door should be reasonable, whether it is flexible when it is opened, and whether there is any phenomenon of block and rebound. In addition, it is also necessary to check whether the door joints are reasonable, the door joints above and below the wooden door cannot exceed 3 mm, and the bottom joints are generally 5-8 mm. In addition, it should be checked whether the joints of the door sleeves are tight. For the cabinet door, it depends on whether the switch is normal or not. When the door is opened, it should be light and no noise. In addition, check whether the cabinet door handle and various locks are installed in the correct position and whether the opening is normal.
Construction acceptance entrance decoration decoration decoration decoration company wooden door
Cree LED Grow Light can save about 30% cost in the application,mainly lie in LED package cost,light engine production costs and the secondary light distributioncosts, which is great significance for applications and promotion of semiconductor lighting. We could also DIY the led ratio(wavelength ratio) which imitate the natural sun spectrum to help your plants grow in a very natural type of atmosphere, Absolutely, we are the very original and professional OEM/ODM factory, our Cree LED Grow Light have the great cost performance with the new integration technology being used for mass production, partners around the world keep telling us how amazed at the increase in output and the decrease in the energy bill.
Applications
Our professional full spectrum Cree LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Key Features
Plug with listed certificate safe to use.
Item Display
The Plug you can choose
Full Spectrum Cree LED Grow Light PAR Value
Our Ageing Test
Package
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Warmly welcome to Visit our Factrory when you come to China.
CREE Chips LED Grow Light,CREE LED Grow Light,CREE Grow Light,CREE COB LED Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com