Decorative panels
It is made of sliced ​​or cut into natural wood, which is made by laminating and pasting on plywood, fiberboard, particleboard and other substrates. This material has a clear texture and natural color and is a high-grade decorative material.
Calcium composite board
It is made of high-pressure polyethylene as a substrate, adding a large amount of light calcium carbonate and a small amount of additives, and is made by processes such as mastication, hot pressing and foaming. This kind of plate is light, soundproof, heat insulation and moisture proof. Mainly used for ceiling tops.
Medium density fiberboard
Density fiberboard is a kind of artificial board. It uses plant fiber as raw material, shaving, fiber separation, slab forming (mixing resin glue and additive paving), and making cellulose and hemicellulose under hot pressing. A sheet of plastic formed by lignin.
Fiberboard
Divided into three types: hard fiberboard, semi-hard fiberboard and soft fiberboard. Hard fiberboard is mainly used for ceiling and partition wall panels. The surface of the board is drilled to form various patterns, and various coatings are applied on the surface to make the decoration effect better. Hard fiberboard sound absorption, waterproof performance, sturdy and durable, easy to construct.
Melamine board
The full name is melamine impregnated film paper veneer wood-based panel. It is a decorative board which is made by immersing paper with different colors or textures in melamine resin adhesive, drying it to a certain degree of curing, and laying it on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressing.
PE calcium composite panel
The main raw materials of the calcium plastic plate are resin, filler, foaming agent and the like. It is a raw material plastic mixer mixing and evenly extruding the sheet material in a compression molding machine to expand and heat the mold, and the sheet material is immediately puffed into a calcium plastic foam board. The expanded longitudinal expansion is 1.7 times and the thickness is expanded by 2 times. The foamed sheet in the hot mold was immediately vacuum formed by vacuum. The specification is generally 500mm × 500mm and the thickness is 6mm.
Aluminum composite panel
It is made of high-pressure polyethylene as a substrate, adding a large amount of aluminum hydroxide and an appropriate amount of flame retardant, and is made by processes such as mastication, hot pressing and foaming. This kind of plate is light, soundproof, heat insulation and moisture proof. Mainly used for ceilings and wall surfaces.
Plywood
The plywood is a three-layer or multi-layered plate-like material which is formed by cutting a wooden section into a veneer or by cutting into a thin wood by wood, and then bonding with an adhesive, usually using odd-numbered veneers and making adjacent veneers The fiber directions are vertically glued to each other, and the front and inner plates are symmetrically disposed on either side of the center layer or the core.
Slim wood veneer
It is made into a 0.1-0.5mm thick sheet with water ash, willow wood, color wood, birch, etc., and is glued to the base material of the plywood. The pattern is beautiful and the decoration is good. The wood quality of Liuan is moderate, the structure is slightly thick, easy to process, the cementing performance is good, the drying process is slightly warped and cracked, and it is mostly used for making plywood or plywood. The fir material is light, easy to dry, easy to process, rough in cut surface, medium in strength, easy to split and has good adhesive performance. It is a mid-range wood that is currently used more commonly.
Bagasse chipboard
Sugarcane bagasse is the residue after sugar-making. After the bagasse of bagasse is removed, its chemical composition is similar to that of wood. It is a good raw material for making plates. Because of the small specific gravity of bagasse and good fiber quality, the obtained plate has high strength and light weight. The water swelling rate is low. It is a medium-density particle board with smooth surface, beautiful color, good dimensional stability, good machinability and decorative properties. Uses: Applicable to furniture, construction, carriage, ship, packaging and other production industries. Gradient structure particleboard from the surface to the center of the particle board, the shavings gradually change from small to coarse, the surface layer has no obvious changes, and is paved with an airflow paver. The surface is fine and smooth, high in strength, good in dimensional stability, and has good machinability and surface decoration. Oriented Structure Particleboard (OSB) Oriented Structure Particleboard is a kind of small diameter material, thinned wood, wood core, board skin, branch material, etc. processed by special equipment to grow 40mm, 70mm, width 5mm, 20mm, thickness 0.3mm, 0.7mm The shaving sheet is a wood-based panel which is formed by hot pressing after drying, sizing and special equipment. Because OSB adopts special technology and many special equipments, it has the advantages of high flexural strength, small linear expansion coefficient, good dimensional stability, strong nail holding ability and easy surface decoration. It is widely used in packaging, construction and vehicles. Shipbuilding and other industries. White is tough and elastic, with sapwoods that are pale milky white and heartwood ranging from light brown to dark brown. The wood grain is obvious and coarse. It is easy to process and is easily bent by steam. Use luxury furniture, flooring, mouldings, fine woodwork, sports equipment, tool handles, etc. Ash is tough and elastic, white or pink with pink. The processing is simple, it is easy to bend by the steam method, but it is easy to decay, so it is not easy to use for appearance. Fireproof board Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives. It is a new type of material that is being used more and more, and its use is not only due to fire prevention. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel. The thickness of the fireproof board is generally 0.8 mm, 1 mm and 1.2 mm. The large core board is a kind of special sandwich plywood. It is made up of parallel strips of the same thickness and different lengths, and is closely spliced. It is generally a five-layer structure. The vertical direction of the large core board (differentiated by the direction of the core material) is poor in bending resistance, but the transverse bending strength is high. Decorative panel decorative panels are commonly known as panels. It is a decorative board with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material. It is a special way of splinting and has a thickness of 3 centimeters. Decorative panels are a high-end finishing material that is currently different from blending practices.
Splint
Also known as plywood, three or more layers of one millimeter thick veneer or sheet adhesive are hot pressed. It has the advantages of light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, and insulation.
Dongguan HengTaichang Doors Co, Ltd. , https://www.dghtcdoor.com