T10 button machine for double-breasted: adaptable to the width of the conveyor belt, making customer management more convenient, suitable for the connection of deep groove conveyor belt with more than 450 groove angle.
The T10 buttoning machine is available in a wide range of sizes: belts with a thickness of 7.5-16 mm are available in different sizes.
Ensure the joint strength: adopt the staggered buckle arrangement to reduce the relative density of the staples in the binding part; after the buckle is bound, the buckle is embedded in the buckle body to improve the wear resistance of the buckle body and prolong the service life of the joint.
Improve the straightness of the joint: It can be bound by the hammer-type nailing machine. After the three-point positioning of the conveyor belt, the cross-order is used to buckle, so that the conveyor belt of the buckle part is evenly distributed and deformed, thereby improving the straightness of the joint. During operation, it can reduce the cause of the deviation of the conveyor belt, and can use the DGK4 drawbar mechanical buckle machine to manually buckle to reduce labor intensity.
Low product price: the price is lower in the buckle of the same strength level.
Factory configuration: 10åŒ200mm broadband buckle, ie 1m connector, is installed in each box.
Belt buckle technical parameters:
Specifications 22 24 26 28
Applicable conveyor belt thickness 7.5-9.5 9.5-11.5 11.5-14 14-16
Conveyor belt tensile strength is less than or equal to 1250N/mm
Roller minimum diameter 250mm
Contact Wang Le
Mobile phone, 13583702071
Electricity
QQ 1508778932
Shandong Ouke Drilling and Mining Machinery Co., Ltd. http://okeshebei003.b2b.hc360.com
Jining Ouke Mining Equipment Co., Ltd. http://okeshebei003.cn.makepolo.com/
Pvc Moulding Angle,Angle Building Moulding,Pvc Angle,Plastic Angle Moulding
TAISHAN CITY WANAN CABLE CO.,LTD , https://www.tswanan.com