First, aluminum frame mounting requirements:
1. Normal curtain wall profiles, common door and window profiles, and industrial profiles must be installed in the same frame.
2. Insulation curtain wall profiles, heat insulation doors and windows profiles must be installed in the same frame.
3. It is not allowed to mix insulation profiles with common profiles in the same frame.
4. Each framed profile must be filled with 5mm below the surface of the frame, and every row of profile must be separated by a pad to ensure that each profile has the effect of hot air circulation in place to warm up.
5. Plane model materials with wall thickness ≥ 4mm are not allowed to overlap (only one per layer is allowed).
6. The small material with wall thickness ≥ 2mm must leave 80mm air passage between each frame.
Second, the aging process:
1. Common curtain wall profiles, ordinary door and window profiles, industrial profiles, must be in the same ageing furnace aging, furnace temperature control in the range of 195 °C ± 5 °C, reach the temperature after 3 hours of heat release, immediately after opening the fan blow 20 minutes Cooling, quality inspectors check the hardness.
2. The heat insulation curtain wall profile and the heat insulation door and window profile must be in the same aging furnace. The furnace temperature is controlled within 180°C±3°C. After the temperature is reached, the heat is kept for 3 hours and the fan is blown for 20 minutes immediately after the furnace is cooled. , quality inspectors check the hardness
3. If the aging insulation profile is less than the furnace, it can put 1 to 2 frames of common profiles (thickness less than 2.0mm) with the aging of the furnace, aging process according to the insulation profile technology.
4. When the material is loaded into the furnace, the end of the profile and the air guide are controlled within 80-100mm.
5. When the furnace temperature reaches the process required temperature, the aging worker measures the actual temperature in the furnace with a glass tube thermometer every 30 minutes and makes the original record.
1. Normal curtain wall profiles, common door and window profiles, and industrial profiles must be installed in the same frame.
2. Insulation curtain wall profiles, heat insulation doors and windows profiles must be installed in the same frame.
3. It is not allowed to mix insulation profiles with common profiles in the same frame.
4. Each framed profile must be filled with 5mm below the surface of the frame, and every row of profile must be separated by a pad to ensure that each profile has the effect of hot air circulation in place to warm up.
5. Plane model materials with wall thickness ≥ 4mm are not allowed to overlap (only one per layer is allowed).
6. The small material with wall thickness ≥ 2mm must leave 80mm air passage between each frame.
Second, the aging process:
1. Common curtain wall profiles, ordinary door and window profiles, industrial profiles, must be in the same ageing furnace aging, furnace temperature control in the range of 195 °C ± 5 °C, reach the temperature after 3 hours of heat release, immediately after opening the fan blow 20 minutes Cooling, quality inspectors check the hardness.
2. The heat insulation curtain wall profile and the heat insulation door and window profile must be in the same aging furnace. The furnace temperature is controlled within 180°C±3°C. After the temperature is reached, the heat is kept for 3 hours and the fan is blown for 20 minutes immediately after the furnace is cooled. , quality inspectors check the hardness
3. If the aging insulation profile is less than the furnace, it can put 1 to 2 frames of common profiles (thickness less than 2.0mm) with the aging of the furnace, aging process according to the insulation profile technology.
4. When the material is loaded into the furnace, the end of the profile and the air guide are controlled within 80-100mm.
5. When the furnace temperature reaches the process required temperature, the aging worker measures the actual temperature in the furnace with a glass tube thermometer every 30 minutes and makes the original record.
Wine rack,stainless steel wine rack,Iron wine rack, wine holder,wine bottle rack
wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting wire bottle.
China leading manufacturers and suppliers of Wine Holder,Wine Bottle Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.
wine bottle rack,metal wine rack,wine display rack,Wine rack holder,honeycomb wine rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net