 I engaged in feed particle machine, farm machinery and farmers and feedlots special equipment. City Bureau of Animal Husbandry is designated to promote the excellent mechanical, but also the majority of farmers receive substantial economic benefits the most dependent, the best equipment money. Below Introduce the use and maintenance of the feed pellet machine :
　　 1. Before using the machine , the machine should be thoroughly cleaned and inspected , the belt tension should be adjusted , and then the power supply should be connected , and the direction should be rotated .
　　 2. Adjust the " pressing screw " of the pressure roller to 0.1-0.3 mm between the pressure roller and the template .
　　 3, when taking the test machine 15 kg powder (calculated according to type 200C, 5 kg and less small, large multi 5 kg), preferably with rice polishings, 5 pounds of meat or peanut Jiamai Pi 15 kg pressure test, repeated rolling after pressing for 15 minutes, not the pressure, the feed hole template with a vise clamp nails (not with a pointed nail, the nail heads preferably polished) open, and then compressed until the normal discharge. If the user's own formula feed can't be pressed out , then the feed material of the mold hole is opened , the food oil is put on the flat mold surface , and then the above-mentioned rice husk or peanut meat and wheat husk feed are pressed out, and then the fine sand is added. (building sand) repeatedly pressing for 10 minutes until the normal discharge.
　　 4 , the length of the pellet feed can adjust the upper and lower position of the cutting knife .
　　 5, the template can be removed if replacement cartridge filled hopper is removed, remove the pressure wheel and cutter, gongs twist off the cap on the spindle, with attachment "chest" hanging out flat die, (templates can be used double-sided, generally After processing 50,000 jin, use it to turn over, and use 105A type 25,000 jin to turn over ).
　　 6, for safety, when the cover is removed, must be off the power switch to turn off the machine, hand and other tools to the contact pressure wheel template.
　　 7. When the machine is rolled to 20,000 kg of decompression wheel for cleaning and maintenance of copper lubricant , a comprehensive maintenance and refueling is carried out every six months .
　　 8 , 105A single-phase motor , please ensure 220V voltage .
　　 9. Install the grounding device with the pole of the motor .
　　 10. For models that use electric motors , customers must install overload protection devices .
In the company: rather bear the loss, do not want to lose credibility, adhere to the "full service, the reputation of Germany a hundred years," the service concept, the present and look to the future, willing to work with customers and friends at home and abroad go hand in hand, create a better future.
The hole saw, also known as the hole saw or hole saw, refers to a special circular saw in the processing of circular holes in modern industry or engineering. It is simple and flexible to operate, convenient to carry, safe and widely used. The hole opener (cutter) is installed on the ordinary electric drill, and it is convenient to cut round holes, square holes, triangular holes, straight lines and curves on the plane and sphere of various plates such as copper, iron, stainless steel and plexiglass.
Hole Saw,Hole Saw Kit,Hole Saw Cutter,Tile Hole Saw
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com