In life photos, because of high-rise issues, pressure problems, resulting in water pressure instability, we often need to install tap water pressure pump to stabilize water delivery. Now, Xiao Bian to introduce the working principle of pressurized water pumps under water and what are the applicable range. Pressurized water pump works: Pressurized water pump working principle: The pressure pump is filled with liquid, and then start the pressure pump, the impeller rotates quickly, the impeller impels the liquid to rotate, the liquid rotates to depend on the inertia to the outer edge of the impeller, At the same time, the impeller sucks liquid from the suction chamber. During this process, the liquid in the impeller flows around the flow impeller, and the liquid acts a lift force on the impeller in the flow around the flow. In turn, the impeller lifts the impeller in a force equal to and opposite to the lift force The role of the liquid, the force of the liquid to work, so that the liquid energy out of the impeller, then the kinetic energy and pressure of liquid are increased. In the case of a living pressure pump, a pipe pressure pump or a tap water pump, the pump is installed on a tap water pipe. If the tap water level is below the plane (horizontal installation) or centerline (vertical installation) of the pump impeller, At this time, the power should be cut off. When the tap water level rises above the plane or center line of the impeller, the power should be turned on again to avoid damaging the mechanical parts (no need to turn off the automatic type). When the pump is used to pump well water, please check if the water inlet pipe leaks; if there is not enough water in the pump chamber, it should be filled with water; if the suction stroke is too high, adjust it properly. Check the import and export pipe diameter is too small or blocked. Automatic use of a period of time, may appear automatic failure phenomenon, mainly in the water pipe rust and other metal products from long-term precipitation, turn off the power after removing the switch, unscrew the screw above, remove the plastic sheet to be cleaned, and then , According to the original reset, debugging normal, you can re-use. Second, pressurized water pump for the environment 1, high-rise buildings, residential areas, villas and other residents living water. 2, enterprises, hotels, office buildings, department stores, large saunas, hospitals, schools, gymnasiums, golf courses, airports and other places of daily water. 3, manufacturing, washing equipment, food industry, factories, industrial and mining production water. 4, the built pool, you can use non-negative pressure water supply equipment and pool shared water supply, further energy saving; 5, the original pressure water supply equipment to transform, you can make full use of the original pressure tank; 6, a variety of cycles System, water plant in the middle of the pressurized pump station. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Smart Downlight,Wifi Smart Light Bulb,Led Smart Emergency Bulb,Smart Emergency Bulb
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.sensorsled.com