Vertical single-suction multi-stage submersible fire pump is mainly used for fire-fighting system pipeline pressurized water, but also for industrial and urban water supply and drainage, high-rise building pressurized water, away from the water, heating, bathroom, Boiler heating and cooling water circulation pressure, air-conditioning and cooling system water supply and equipment and other occasions. Now we talk about the characteristics and technical parameters of vertical single-suction multi-stage submersible fire pump. Vertical single-suction multi-stage sub-type fire pump First, the vertical single-suction multi-stage sub-type fire pump Features 1, the pump body compact, small size, beautiful appearance, the vertical body decided to install a small area, Pump foot center, thus enhancing the pump running stability and service life. 2, Pump inlet and outlet are horizontal, simplifying the pipe connection. 3, according to need, suction inlet and spit outlet can be installed into the same direction or 90 °, 180 °, 270 ° several different directions to meet different connection occasions. 4, the pump pressure can be increased or decreased according to the need to pump series and cut the impeller diameter to be met, without changing the installation area, which is not available in other pumps. 5, pump rotor has a smaller degree of around, smooth operation, small vibration, low noise, long service life. Second, the vertical single-stage multi-stage fire pump technical parameters Flow: 4-100L / S; Pressure: 0.16-2.25Mpa; Power: 3-200KW; Speed: 1450r / min; Diameter: φ50-φ200; temperature range : ≤80 ℃. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Round Ductile Manhole Cover is made of ductile; mainly both the cover and frame is in round condition, we make the manhole cover on BS EN124, Mainly our products are A15, B125, C250 and D400, sometimes also make it E600 and F900 in case of need. For A15, B125, C250 and D400 ductile manhole covers to be used in Green belt, Pavement, Auxiliary road, Main road and Express way. We make ductile manhole covers all by producing line, the quality is very good, and we warmly welcome customers all over the world to do business with us.
Ductile round manhole covers, Ductile round manhole covers D400, Ductile round manhole covers opening 600.
Runchun Casting (Zhoushan) Co., Ltd. , https://www.en124casting.com