As we all know, underground parking is generally at the bottom, and many ground materials cannot meet its requirements under the influence of non-circulation of air and temperature and humidity; this is very difficult for the selection of materials for the ground and the design of construction plans. What are the characteristics of underground parking lot paint ? Let's take a look at it.
Underground parking lot floor paint performance characteristics
Impact resistance, heavy pressure resistance, good mechanical properties;
Dustproof, mildewproof, wear resistant, good hardness;
Shrinkage after hardening, no cracks;
Resistant to water, oil, acid, alkali and other general chemical corrosion;
The appearance is smooth, bright and diverse;
Seamless, easy to clean and easy to maintain.
Underground parking lot floor paint application scope
Large-scale parking lots, supermarkets, buildings, warehouses, auto showrooms, auto repair shops, and other areas where special requirements for floor and machine performance are high, with a certain impact on machinery, electronics, electrical appliances, instruments, medicine, textiles, clothing, etc. The floor of a factory building for food and tobacco.
Why Use Underground Parking Lot Floor Paint
The increase of floor paint protection works in underground parking lots can effectively avoid the dust from the stopped vehicles, especially in rainy weather, which can effectively prevent annoying mud and water spots in the parking lot. In addition, after the parking lot has been protected by a floor paint, the surface is easy to clean, and the clean and comfortable environment inside the underground parking lot can be maintained at all times, which is in line with the upscale style of the property.
Health and environmental protection, non-toxic, tasteless and flame-retardant.
After treatment, the wear resistance, compressive strength and bending strength of the floor are higher than those of ordinary cement mortar.
After treatment, the floor is resistant to acid and alkali, and has low water absorption.
☆ Requirements for Concrete Foundation:
1, the ground must have been done before the water treatment, the ground, the corner wall surface, the ceiling no leakage of water;
2, the cement floor standards: to be flat, no empty leakage from the drum phenomenon, friction can not afford sand and dust;
3, the ground water content less than 6%;
4, the thickness of the ground concrete layer is greater than 5cm, the ground quality is good (label, high cement content, light leveling);
5. The water-cement ratio of grass-roots concrete shall be controlled below 0.50, and the strength shall be above C25. The concrete mix design shall minimize the segregation and control the bleeding.
6. It is recommended to increase the concrete strength by using high-strength cement or early-strength cement, dry-hard concrete with low water-cement ratio, and adding concrete admixtures and admixtures.
7. The construction of the cement floor can be carried out after four weeks. In winter, the temperature of the construction environment must not be lower than 5°C. It is recommended that the concrete be added with proper early strength agent and the humidity is less than 85%.
8. The expansion joints shall be cut according to the architectural design requirements. The stitches shall be uniform and the width shall be 3-5mm. The joints do not need to be filled with asphalt or other materials, and our company will be responsible for filling them with special materials.
Summary: The above is the introduction of Xiao Bian's underground floor parking floor paint . I hope to help everyone.
Floor paint
Pan Head Screw,Pan Head Sharp Screw,Phillip Pan Head Sharp Screw ,Pan Phillips Head Screw
Handan Jiankun Hardware Products Co., Ltd / Handan best import and export trade co., Ltd , https://www.jkscrew.com