Natural stone is permeable to water and permeable. When it is soaked in rain, there will be water spots and it will not dry naturally. The iron molecules in the stone will appear yellow rust stains when they are soaked for a long time. It is a common stone disease to remove the powdered and bursting stone as soon as possible. A large area of ​​water stains will seriously affect the environmental effects of the wall surface, which is a headache for many property cleaning companies.
The best and easiest way is:
The R69 granite rust remover and the R96 marble rust remover are mixed and attached to the water molecules inside the stone.
The specific sample test steps are as follows:
First, bring plastic gloves, pour R69 and R96 into a clean paper cup in a standard ratio of 1:1;
Second, cover 4-6 layers of clean paper towels on the water surface;
Third, the mixture should be carefully poured onto the surface of the paper towel to fully soak and not flow out, and the effect of the sample will be more obvious;
Fourth, tear a small piece of plastic bag and cover it tightly to avoid volatilization of the drug;
Fifth, the corners are pasted with the textured paper for 4 weeks, and the ground is removed after 6-8 hours.
For severe stains, you need to repeat the operation 2-3 times, and some need to be baked.
When working in large areas, it can be adhered using a packaging film.
For the penetration of stone oil traces, there is currently no very effective remover on the market.
All removers will more or less damage the stone surface, and the repair labor is strong. Therefore, the best way is to prevent problems before they happen. It is very important to make stone surface waterproof protection in advance.
Concerned about surprises
Label: How to do a sample test of natural stone to remove water spots
Previous: The floor market is more greasy, how to break? Next: How to install the shower how to install the height
PVC High Speed Door are designed for indoor use and ensure rapid handling operations between different areas that should remain separated. These safe and efficient industrial doors are made of a shaped steel frame and covered with PVC. These high speed doors are safe and efficient and consist of a shaped steel frame covered with PVC. Safety is ensured by their photocells and barriers.
High speed doors protect us from harm, save energy and help us to separate processes for optimal productivity. A high speed door's most important job is to simply open and close quickly and safely every time you need it.
The high speed pvc roll shutter door require high strains, caused by the high operating speed and the frequency of openings, have to be taken into account during construction. In the same way, basic conditions like size and installation location add up to considerable requirements regarding safety and control technique.
PVC High Speed Door,Large PVC High Speed Door,Transparent High Speed Door,Great Performance High Speed Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com