The raw material of the art floor is a high-molecular polymer colored dry powder mortar. It is a high-tech new floor material that can be used on the surface of concrete to produce rich and colorful decorative surfaces with high strength and high wear resistance. The wall and the old ground were reconstructed and reconstructed to simulate the pattern of various wall tiles, tiles, stones, slate, and floor tiles in traditional building materials. The following small series introduces the art floor practice and artistic floor construction precautions.
Art floor practices
1. About 1cm cement slurry is added before the concrete surface is initially solidified, and the surface water mortar should be evenly wiped and roughened.
2, the amount of good hardened material mold floor evenly spread on the concrete surface of the initial setting stage, the first time about two-thirds of the amount, until the initial setting of the second hardened material coating, the popular three-point The amount of one can be used up.
3, according to the actual hardening of the concrete, at least three times the manual iron plate light collection and leveling operations, and in the light operation, should pay attention to each other should be staggered.
4. When the hardening material is initially set to the surface dry without obvious moisture, evenly apply a layer of release powder matching with the hardening material.
5, the most critical step to: According to the selected pattern, keep the pattern die fixed and pressed, the pressure pattern should pay attention to a molding can not be heavy pressure.
6. It takes at least 2-3 days for the floor to completely dry and solidify, and the surface of the pattern can be cleaned with water or detergent after drying.
7, after the cleaning and hardening mold floor is basically formed, if you want to increase the appearance, you can apply liquid brightener on the surface, there is conservation and enhance the role of light.
Art floor construction considerations
1. It is forbidden to use the art floor in rainy days or stormy days and weather conditions below zero.
2. Before paving concrete, it must be clear whether the roadbed is dense and whether steel reinforcement is needed to prevent the concrete from breaking due to the settlement of the foundation.
3. Concrete expansion joints or concrete cutting shall be reserved to prevent cracking of concrete.
4. The art floor should be closed and construction should be avoided. Cross construction and pedestrians' misplacement into the construction area should be avoided.
5, the art floor of the concrete should use the higher marked concrete (≮C25 concrete).
Art Floor Features
1. The art mold floor is a ground material with strong artistic and special decoration requirements. It is a ready-to-use, high-strength, wear-resistant material containing special nano-mineral aggregates, inorganic pigments and additives. Its advantages are easy construction, one-time molding, long service life, quick construction, and easy repair and discoloration. At the same time, it can make up for the inconveniences of poor color, unevenness, looseness, and short life cycle.
2. The color stamper floor made of hardener material has anti-abrasion, anti-slip, anti-freeze, dust-free, easy to clean, high-strength, impact-resistance, and a wide range of choices and flexibility in color and style. The characteristics of low cost, high quality and environmental protection are the ideal choice for the current landscape, municipal, parking, park trails, commercial districts and cultural and recreational facilities.
Editor's summary: The art floor practices and art floor construction precautions are introduced here, and I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Floor art floor practices
LEDER technology`s step light illuminates at night and solar power charges the lights during the day. The step light will light up your patio, walkway, deck, and stairs for extra safety with bright LED.
This Solar Powered Battery Powered Deck Light Pack is weatherproof stainless steel rechargeable solar step lights that feature ultra-bright surface mount LED and a high-performance solar panel. Plus the built-in light sensor automatically turns this light on at night and the frosted front plate evenly disperses light so you can see in the dark. Never worry about tripping over wires, cords, or replacing dead batteries again. Simply mount this light horizontally against any flat surface using the provided installation accessories and enjoy over 8 hours of light every night! Each package includes 2 LED lights, mounting screws, fasteners, and installed solar rechargeable batteries.
Features:
• Solar Charging Technology
• Made of stainless steel
• reduced design
• Energy saving save electricity
• Color temperature :3000k-6000K
• Auto-induction
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
Allowing you to perfectly illuminate your deck, stairs, walkway, or dock. Plus this light is made of weather resistant solid stainless steel for year round use.
We have rich production experience in lighting .Except Step Light , we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light & LED Bollard Light as so on .
Stair Lights,LED Stair Lights,Stair Lights Indoor,Solar Step Lights
LEDER LIGHTING CO.,LTD , https://www.lederlight.com