The floor tiles are inseparable from each of our families during the renovation. When we chose, everyone knows the importance of the tiles, so we pay attention to how to do it during construction. So we know that when tiles affixed's what we need to pay attention to what? A lot of people do not know it! Today small just like we take a look tiles affixed methods and precautions tiles affixed to it!
Method of affixing tiles
1. Soak the tiles. Clean the purchased tiles first and soak for more than 2 hours. The soaking is to allow the tile to fully absorb the moisture, so as to avoid the moisture in the material after the paving is completed, resulting in insufficient moisture of the adhesive, affecting the adhesion firmness, thereby causing empty drums and falling off. The tiles need to be removed from the water and wiped off the surface before being fully immersed in water and ready to be laid.
2. Set the auxiliary line. Before starting the paving, you should first hang the vertical line on the wall level to determine the wall size line of the tile. Set the horizontal line again to ensure that the tile is laid flat and straight and the surface is flat.
3. Set the supporting planks. In the tile laying, it is necessary to use a horizontal line as a criterion, and a wooden board capable of supporting the tile is provided to prevent the tile from being displaced or falling before reaching the adhesive strength.
4. Paid in order. The paving of the floor tiles generally starts from the side of the door and window (or balcony), from top to bottom, in the order of left and right. The specific method of paving is: firstly leveling with water, using a shovel to smudge the mud (or other adhesive) on the back of the tile, then attaching the tile to the wall, then tapping the tile with a shovel handle or rubber hammer. Make the mud fill the space between the wall and the tile.
5. Clean up and maintain. The stains and dust on the surface of the floor tile must be cleaned up in time. Here are some ways to clean and maintain it. When the surface is seriously polluted, especially when it is contaminated with some hard-to-remove stains.
Wipe with a 10% strength diluted hydrochloric acid solution.
The main points of the floor tiles
1. Be sure to cover the pipe before it is attached, because the exposed pipe is very unsightly, and the sound will be very loud when it comes out, so it is very important to take this step. You can wrap the pipe with soundproof cotton and then use the brick
Lay up, so the isolation effect is very good.
2. If you are laying tiles on the bathroom, you should pay attention to the problem of waterproofing. Because the water absorption of the wall after waterproofing will be relatively poor, the wall that has been waterproofed needs to be reinforced with tile adhesive when it is tiled, so as to avoid the phenomenon of brick falling.
Because we know the importance of it when we stick the floor tiles, it is also important to learn how to lay the paving before the renovation. The above is the method of the floor tiles introduced by Xiaobian today and the precautions for the floor tiles are finished here. For more information, please continue to pay attention to the decoration home.
More related wonderful reading:
The main points of paving the floor tiles
Introduction of the floor tile process, introduction of floor tiles
The balcony generally uses what the floor tiles are beautiful, and the floor tiles are precautions.
Lowes Outdoor Ceiling Fans,Outdoor Ceiling Fan With Light,Installing A Ceiling Fan,Large Ceiling Fans
JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmesclightingfan.com