Our desiccant masterbatch is designed specifically for removing moisture from recycled PE/PP/PS/EVA/HIPS during processing. Its great advantage is it can effectively absorb moisture while processing, so that the recycled PE/PP/PS/EVA/HIPS scraps and granule could be directly used to make plastic products without pre-drying.And the product quality could be proved to be very good.Â
  Actually,We add high MI PE into our desiccant masterbatch instead of common low MI plastic as carrier to make it perform better,so the dispersion,liquidity and effectiveness are very good and our desiccant masterbatch quality is better!!
Our moisture absorbent master batch compared with the driers on the costs:
| Method | Labor cost | Equipment depreciation | Electricity cost | Material cost | Safeguard fee | efficiency |
| Driers | Need more workers, all the process need to take good care | Need to purchase a new equipment, cause the depreciation fee | cause extra electric cost while drying | The material weight lost while drying because the moisture was evaporated | Much noise | It will extend the working time |
| Moisture absorber | The process no need to add extra workforce | No need to purchase new equipment | No extra electric cost | The moisture was absorbed by the master batch, which still stays in the material | No noise | Save time and make high efficiency |
NOTE:Â
  Normally 2-5% added for film product and 4-6% for sheet/board/pipe product, just mix it with the resin material like the color master batch, but please not dry the mixed material with oven or some other machine, the mixing shall under normal temperature.
  There are two key points that should be specially noticed while processing:
1. premixing:  high temperature mixing before processing is not permitted, so do not heat up the stirring machine or material, and do not let the mixed material stay in the stirring machine for a long time or it will absorb moisture while mixing and block the screen. Simple stirring under normal temperature is ok.
Â
2. storing:Â this master batch should be used within 12-24 hours after the pack has been opened for it absorbs water moisture very well when it was exposed to air.
Package:
  For dessicant MB,we have two kinds of packages,one is 25kg cartons with 5*5kg Vacuum bag;another one is Soft Package,we use 25kg kraft paper bags with 5*5kg double-layer pe bag.(25kg/bag,1FCL=27tons)
  We can also customize desiccant masterbatch according to your requirements,so please don't hesitate to contact me!^_^
Tel/+86-15889980235
Â
Lathe And Milling Processing Parts
Lathe and milling processing parts refer to precision metal parts that are manufactured using lathe and milling machines. These machines use computer numerical control (CNC) to produce parts to exacting specifications with high accuracy and precision.
Lathe machines are used to produce parts that have a cylindrical shape, while milling machines are used to produce parts with complex shapes and irregular surfaces. The combination of these two machining processes allows for the creation of parts with different shapes, sizes, and complexities.
Lathe and milling processing parts are used in a wide range of industries, including aerospace, automotive, electronics, and medical. These parts are typically produced from a variety of metals, including steel, aluminum, brass, and copper.
The advantages of lathe and milling processing parts are their high accuracy and precision. The CNC machines used in their production are programmed to make precise cuts and movements, resulting in parts that are consistent and accurate. This is especially beneficial in industries where quality control is essential for safety and reliability.
Another benefit of lathe and milling processing parts is their versatility. The combination of the two machining processes allows for the creation of a wide range of parts with complex shapes and irregular surfaces. These parts can also be produced in large quantities, allowing for efficient mass production.
Lathe and milling processing parts provide a cost-effective solution for many manufacturing needs. The precision of these machines means that parts can be manufactured to exact specifications, minimizing the need for additional processing or finishing. This can result in significant cost savings for manufacturers and ultimately lower prices for consumers.
In conclusion, lathe and milling processing parts are essential components in the manufacturing industry. These precision parts provide accuracy, versatility, and cost-effectiveness for a wide range of applications. With the ability to produce parts with high accuracy and precision, lathe and milling processing parts offer a powerful solution for many manufacturing needs.
Turning And Milling Operations,Lathe And Milling Machining Parts,Custom Lathe And Milling Parts,Pricision Lathe And Milling Parts
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lzautoindust.com