It is reported that mankind will acquire a new solar energy technology - space solar energy technology within the next ten or twenty years, and will put this plan into practice. 
The core concept of space-based solar energy is to place solar panels on artificial satellites, then transmit the collected energy back to the earth's receivers, and finally convert it into electrical energy. Collecting sunlight in space means that solar panels must completely absorb solar energy under atmospheric pressure. Satellites in synch with the Earth can be exposed to the sun all day and avoid cloud cover. At the same time, due to the height of the satellite, the collected sunlight can be rapidly re-transmitted to where it is most needed.
It has been shown that under current technological conditions, solar energy technology in space over the next 30 years may be an economically viable alternative to current commodity energy. Imagine if you believe that the large-scale application of this technology must have very objective prospects.
Poleline construction hardware refers to the various components and equipment used in the construction and maintenance of power transmission and distribution lines. These hardware items are designed to support and secure the conductors, insulators, and other components of the poleline system. Some common examples of poleline construction hardware include:
Pole Line Fittings: These are various fittings and attachments that are used to connect conductors to the poles, insulators, and other components. Examples include pole brackets, crossarms, guy wire clamps, and pole bands.
Insulators: Insulators are used to support and isolate electric conductors from the pole or tower structure. They prevent the flow of electric current from the conductor to the ground. Insulators can be made of various materials such as glass, porcelain, or composite materials.
Anchoring and Guying Systems: These systems are used to provide stability and support to the poles or towers. They include guy wires, anchors, deadends, and turnbuckles.
Yokelink supply a full line of Poleline Hardware, we offer from the top of the pole to underground. Here are some of the pole line accessories that you are likely to use for your project
Yokelink Flat Crossarm Brace used to support wood cross arms carrying tangent loads. Round corners on the brace ends prevent damage and reduce the possibility of injury. Hot dip galvanized meet ASTM A153 specification.
Yokelink Alley Arm Brace used for side-arm construction, mounted to one side of the pole, mount at a 45 degree angle and come complete with solidly riveted lineman step. Hot dip galvanized meet ASTM A153 specification.
Yokelink Insulator Brackets are used to mount post type insulators from 15kv to 34.5kv on the side of the pole. Hot dip galvanized meet ASTM A153 specification.
Yokelink Cutout and Arrester Brackets are used for strength and mounting a variety of electrical equipment including arresters, cutouts, combination units and terminations. All components are Hot dip galvanized to meet ASTM A153 specification.
Transformer Bracket, Brace, Cutout, Alley, Cross Arm Brace, Pole Band
Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com