Many manufacturers who produce screws will use electroplating to mix many products. For example, in the case of a small number of screws, the electroplating factory will mix different specifications of screws together for electroplating. In this case, it is very easy to cause some screws to be plated or to be poorly plated, which will eventually cause the screws to be deformed or even scrapped. Then the screws need to pay attention to what matters in the case of electroplating 1, it is difficult to meet the quality requirements of different aspects of the plating of different screws in the conventional electroplating process conditions;
2, hardware Screw specifications are too close, size, length seems to be almost the same. Such hardware screws have to be plated separately. Otherwise, when it's time to electroplate, it's not good.
3, the heavier screws and the lighter screws, the smaller screws and the larger screws are separately plated. Otherwise, it may happen that the two will collide during the plating process, resulting in damage to the screws.
4, screws are easy to two kinds of cards should be separated from the plating. Otherwise two different sizes and types of screws will stick together and they will clump together during plating. Can not lead to electroplating. Even after plating, it is difficult for us to separate the two types of screws.
2, hardware Screw specifications are too close, size, length seems to be almost the same. Such hardware screws have to be plated separately. Otherwise, when it's time to electroplate, it's not good.
3, the heavier screws and the lighter screws, the smaller screws and the larger screws are separately plated. Otherwise, it may happen that the two will collide during the plating process, resulting in damage to the screws.
4, screws are easy to two kinds of cards should be separated from the plating. Otherwise two different sizes and types of screws will stick together and they will clump together during plating. Can not lead to electroplating. Even after plating, it is difficult for us to separate the two types of screws.
Wire Stainless Steel Product.
China Kitchen Rack,Sink Grid,Stainless Mesh Storage Baskets,Kitchen Wire Storage, we offered that you can trust. Welcome to do business with us.
Kitchen Rack is made of high quality 304 stainless steel, This kind of material steel luxury, never rust, resist corruption, easily clean, safe, healthy and durable. Prevent rust or chemicals from contaminating food and damaging health
Kitchenware,Bread basket,dish rack,cutting board rack,Sink Grid,dish drying rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net